APRS Track Direct

My position About ☰

reset

HP1CDW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1758219175	14.38 Volt	300 Pkt	100 Pkt	69 Pcnt	69 Pcnt
1758218575	14.38 Volt	300 Pkt	100 Pkt	70 Pcnt	69 Pcnt
1758217975	13.9 Volt	290 Pkt	110 Pkt	72 Pcnt	69 Pcnt
1758217375	14.38 Volt	300 Pkt	110 Pkt	73 Pcnt	69 Pcnt
1758216775	14.38 Volt	300 Pkt	120 Pkt	74 Pcnt	69 Pcnt
1758216175	14.38 Volt	300 Pkt	120 Pkt	73 Pcnt	69 Pcnt
1758215575	14.38 Volt	280 Pkt	110 Pkt	74 Pcnt	69 Pcnt
1758214975	14.38 Volt	270 Pkt	110 Pkt	74 Pcnt	69 Pcnt
1758214377	14.38 Volt	280 Pkt	110 Pkt	76 Pcnt	69 Pcnt
1758213775	14.38 Volt	280 Pkt	100 Pkt	73 Pcnt	69 Pcnt
1758213175	14.38 Volt	270 Pkt	100 Pkt	73 Pcnt	69 Pcnt
1758212575	14.38 Volt	270 Pkt	100 Pkt	73 Pcnt	69 Pcnt
1758211975	14.38 Volt	270 Pkt	100 Pkt	72 Pcnt	69 Pcnt
1758211375	14.38 Volt	260 Pkt	100 Pkt	71 Pcnt	69 Pcnt
1758210780	14.38 Volt	260 Pkt	100 Pkt	68 Pcnt	69 Pcnt
1758210175	14.38 Volt	260 Pkt	100 Pkt	69 Pcnt	69 Pcnt
1758209575	14.38 Volt	250 Pkt	100 Pkt	68 Pcnt	69 Pcnt
1758208975	14.38 Volt	280 Pkt	120 Pkt	69 Pcnt	69 Pcnt
1758208375	14.38 Volt	290 Pkt	130 Pkt	70 Pcnt	69 Pcnt
1758207776	14.14 Volt	300 Pkt	130 Pkt	70 Pcnt	69 Pcnt
1758207177	14.38 Volt	310 Pkt	150 Pkt	70 Pcnt	69 Pcnt
1758206575	14.38 Volt	380 Pkt	180 Pkt	67 Pcnt	69 Pcnt
1758205975	14.38 Volt	390 Pkt	180 Pkt	69 Pcnt	69 Pcnt
1758205376	14.38 Volt	390 Pkt	180 Pkt	68 Pcnt	69 Pcnt
1758204775	14.14 Volt	420 Pkt	200 Pkt	67 Pcnt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)