This is the latest recevied telemetry packets stored in our database for station/object DM2OV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274482 | 14.8 deg C | 91.7 % | 1019.2 hPa | 0 | 0 |
| 1778010821 | 14.2 deg C | 97 % | 1004.7 hPa | 0 | 0 |
| 1778009019 | 14.2 deg C | 97.8 % | 1004.8 hPa | 0 | 0 |
| 1778008120 | 14.2 deg C | 98 % | 1004.7 hPa | 0 | 0 |
| 1778007228 | 14.1 deg C | 98.5 % | 1004.5 hPa | 0 | 0 |
| 1777996423 | 20.5 deg C | 64.3 % | 1003 hPa | 0 | 0 |
| 1777995521 | 20.9 deg C | 62.2 % | 1003 hPa | 0 | 0 |
| 1777994620 | 22 deg C | 59.6 % | 1002.9 hPa | 0 | 0 |
| 1777992818 | 25.7 deg C | 52.4 % | 1002.8 hPa | 0 | 0 |
| 1777989207 | 25.4 deg C | 51.5 % | 1003.4 hPa | 0 | 0 |
| 1777986512 | 23.1 deg C | 53.4 % | 1004.2 hPa | 0 | 0 |
| 1777978393 | 21.2 deg C | 73.3 % | 1005.8 hPa | 0 | 0 |
| 1777975678 | 18.7 deg C | 79.4 % | 1006.5 hPa | 0 | 0 |
| 1777974776 | 17.6 deg C | 80.5 % | 1006.7 hPa | 0 | 0 |
| 1777973887 | 17.2 deg C | 83 % | 1006.8 hPa | 0 | 0 |
| 1777972978 | 16.8 deg C | 83.3 % | 1007 hPa | 0 | 0 |
| 1777972079 | 16.6 deg C | 83.5 % | 1007.2 hPa | 0 | 0 |
| 1777971169 | 16 deg C | 85 % | 1007.3 hPa | 0 | 0 |
| 1777969368 | 16.2 deg C | 85 % | 1007.5 hPa | 0 | 0 |
| 1777968464 | 16 deg C | 84.4 % | 1007.5 hPa | 0 | 0 |
| 1777967569 | 15.8 deg C | 85.6 % | 1007.5 hPa | 0 | 0 |
| 1777963975 | 14.7 deg C | 89.8 % | 1007.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)