This is the latest recevied telemetry packets stored in our database for station/object SA5VCC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753875158 | 4.18 | 98 | 37 | 23 | 0 |
| 1753873954 | 4.19 | 99 | 43 | 22.6 | 0 |
| 1753872741 | 4.19 | 99 | 42 | 22.6 | 0 |
| 1753871531 | 4.19 | 99 | 40 | 23 | 0 |
| 1753870323 | 4.17 | 97 | 39 | 22.6 | 0 |
| 1753867900 | 4.17 | 97 | 35 | 22.2 | 0 |
| 1753866695 | 4.18 | 99 | 39 | 22.5 | 0 |
| 1753865485 | 4.17 | 98 | 35 | 22 | 0 |
| 1753864277 | 4.18 | 98 | 37 | 21.9 | 0 |
| 1753863065 | 4.18 | 98 | 33 | 21.8 | 0 |
| 1753861855 | 4.18 | 98 | 32 | 21.7 | 0 |
| 1753858227 | 4.17 | 98 | 26 | 21.4 | 0 |
| 1753855812 | 4.15 | 96 | 28 | 21.3 | 0 |
| 1753854607 | 4.15 | 96 | 31 | 21.3 | 0 |
| 1753853398 | 4.15 | 96 | 31 | 21.2 | 0 |
| 1753852185 | 4.15 | 96 | 27 | 21.1 | 0 |
| 1753850972 | 4.14 | 95 | 21 | 21.1 | 0 |
| 1753849764 | 4.14 | 95 | 21 | 21.1 | 0 |
| 1753848558 | 4.14 | 95 | 23 | 21.1 | 0 |
| 1753847346 | 4.14 | 95 | 22 | 21 | 0 |
| 1753844922 | 4.13 | 94 | 15 | 21 | 0 |
| 1753843714 | 4.13 | 94 | 15 | 21 | 0 |
| 1753842505 | 4.13 | 94 | 14 | 21.1 | 0 |
| 1753841298 | 4.13 | 94 | 15 | 21 | 0 |
| 1753840089 | 4.13 | 94 | 15 | 21.1 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 2.5
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)