This is the latest recevied telemetry packets stored in our database for station/object IW1CBG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274531 | - | - | - | - | - |
| 1778032668 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778032069 | 0.57 Volt | 298 | 0 | 0 | 0 |
| 1778031468 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778030869 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778030267 | 0.57 Volt | 298 | 0 | 0 | 0 |
| 1778029671 | 0.47 Volt | 297 | 0 | 0 | 0 |
| 1778029067 | 0.61 Volt | 297 | 0 | 0 | 0 |
| 1778027867 | 0.59 Volt | 298 | 0 | 0 | 0 |
| 1778027267 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778026668 | 0.57 Volt | 297 | 0 | 0 | 0 |
| 1778026067 | 0.59 Volt | 298 | 0 | 0 | 0 |
| 1778025467 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778024868 | 0.57 Volt | 298 | 0 | 0 | 0 |
| 1778024267 | 0.57 Volt | 297 | 0 | 0 | 0 |
| 1778023668 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778023068 | 0.57 Volt | 298 | 0 | 0 | 0 |
| 1778022467 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778021867 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778021267 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778020667 | 0.55 Volt | 297 | 0 | 0 | 0 |
| 1778020067 | 0.57 Volt | 297 | 0 | 0 | 0 |
| 1778019468 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778018866 | 0.59 Volt | 297 | 0 | 0 | 0 |
| 1778018267 | 0.59 Volt | 297 | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.0196, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)