This is the latest recevied telemetry packets stored in our database for station/object W8CWV-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcell* | RSSI* | Light* | Awake* | Value5* |
|---|---|---|---|---|---|
| 1758180832 | 4.56 Vdc | -76 dBm | 0 lux | 2.2 secs | 0 |
| 1758180257 | 4.56 Vdc | -75 dBm | 0 lux | 2.2 secs | 0 |
| 1758179681 | 4.56 Vdc | -76 dBm | 0 lux | 3.1 secs | 0 |
| 1758179108 | 4.56 Vdc | -75 dBm | 0 lux | 2.8 secs | 0 |
| 1758178534 | 4.56 Vdc | -75 dBm | 0 lux | 2.2 secs | 0 |
| 1758177957 | 4.56 Vdc | -76 dBm | 0 lux | 4.8 secs | 0 |
| 1758177388 | 4.56 Vdc | -77 dBm | 0 lux | 1.9 secs | 0 |
| 1758176808 | 4.56 Vdc | -76 dBm | 0 lux | 3.8 secs | 0 |
| 1758176237 | 4.56 Vdc | -80 dBm | 0 lux | 2.3 secs | 0 |
| 1758175660 | 4.56 Vdc | -76 dBm | 0 lux | 3.2 secs | 0 |
| 1758175089 | 4.56 Vdc | -82 dBm | 0 lux | 1.9 secs | 0 |
| 1758174512 | 4.56 Vdc | -76 dBm | 0 lux | 6.4 secs | 0 |
| 1758173948 | 4.57 Vdc | -81 dBm | 0 lux | 3.2 secs | 0 |
| 1758173371 | 4.57 Vdc | -80 dBm | 0 lux | 2.9 secs | 0 |
| 1758172797 | 4.56 Vdc | -79 dBm | 0 lux | 2.2 secs | 0 |
| 1758172221 | 4.57 Vdc | -76 dBm | 0 lux | 2.3 secs | 0 |
| 1758171645 | 4.57 Vdc | -76 dBm | 0 lux | 4.8 secs | 0 |
| 1758171075 | 4.57 Vdc | -79 dBm | 0 lux | 2.9 secs | 0 |
| 1758170499 | 4.57 Vdc | -78 dBm | 0 lux | 4.2 secs | 0 |
| 1758169930 | 4.57 Vdc | -76 dBm | 0 lux | 2.1 secs | 0 |
| 1758169351 | 4.57 Vdc | -76 dBm | 0 lux | 1.8 secs | 0 |
| 1758168775 | 4.57 Vdc | -75 dBm | 0 lux | 2.2 secs | 0 |
| 1758168200 | 4.57 Vdc | -75 dBm | 0 lux | 2.5 secs | 0 |
| 1758167624 | 4.57 Vdc | -76 dBm | 0 lux | 2.1 secs | 0 |
| 1758167049 | 4.57 Vdc | -77 dBm | 0 lux | 4.2 secs | 0 |
*Used Equation Coefficients:
Vcell: 0, 0.01, 2.5
RSSI: 0, -1, 0
Light: 1, 0, 0
Awake: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)