This is the latest recevied telemetry packets stored in our database for station/object DG3NAD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274131 | 18.2 deg C | 59.3 % | 1020.2 hPa | 0 | 0 |
| 1836273981 | 18.3 deg C | 59.3 % | 1019.5 hPa | 0 | 0 |
| 1766211897 | 8.4 deg C | 70.3 % | 1019.9 hPa | 0 | 0 |
| 1766210997 | 8.5 deg C | 70.2 % | 1019.8 hPa | 0 | 0 |
| 1766210097 | 8.5 deg C | 70.4 % | 1019.7 hPa | 0 | 0 |
| 1766209197 | 8.4 deg C | 70.4 % | 1019.9 hPa | 0 | 0 |
| 1766208297 | 8.4 deg C | 70.4 % | 1019.6 hPa | 0 | 0 |
| 1766207397 | 8.4 deg C | 70.4 % | 1019.6 hPa | 0 | 0 |
| 1766206496 | 8.2 deg C | 70.7 % | 1020.7 hPa | 0 | 0 |
| 1766205596 | 8.2 deg C | 70.7 % | 1019.7 hPa | 0 | 0 |
| 1766204696 | 8.2 deg C | 70.7 % | 1018.4 hPa | 0 | 0 |
| 1766203796 | 8.1 deg C | 70.6 % | 1020.3 hPa | 0 | 0 |
| 1766202896 | 8.1 deg C | 70.6 % | 1020 hPa | 0 | 0 |
| 1766201996 | 8 deg C | 70.7 % | 1020.8 hPa | 0 | 0 |
| 1766201096 | 7.9 deg C | 71 % | 1019.6 hPa | 0 | 0 |
| 1766200196 | 7.7 deg C | 71.2 % | 1020.1 hPa | 0 | 0 |
| 1766199296 | 7.5 deg C | 71.6 % | 1020.5 hPa | 0 | 0 |
| 1766198396 | 7.6 deg C | 71.4 % | 1020.4 hPa | 0 | 0 |
| 1766197496 | 7.9 deg C | 71.2 % | 1021 hPa | 0 | 0 |
| 1766196595 | 8 deg C | 71 % | 1020.6 hPa | 0 | 0 |
| 1766195695 | 8.2 deg C | 70.9 % | 1021 hPa | 0 | 0 |
| 1766194795 | 8.3 deg C | 70.8 % | 1020.6 hPa | 0 | 0 |
| 1766193895 | 8.4 deg C | 70.8 % | 1020.1 hPa | 0 | 0 |
| 1766192995 | 8.4 deg C | 70.8 % | 1020.7 hPa | 0 | 0 |
| 1766192095 | 8.4 deg C | 70.9 % | 1020.9 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)