APRS Track Direct

My position About ☰

reset

VK5RWR-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RWR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1744996799	12.13 Volt	110 Pkt	90 Pcnt	20.5 C
1744995899	12.27 Volt	120 Pkt	83 Pcnt	20.5 C
1744994999	12.35 Volt	120 Pkt	79 Pcnt	20.5 C
1744994099	12.27 Volt	110 Pkt	69 Pcnt	20.5 C
1744993199	12.49 Volt	120 Pkt	70 Pcnt	21 C
1744992299	12.49 Volt	100 Pkt	67 Pcnt	21 C
1744991399	12.49 Volt	120 Pkt	69 Pcnt	21.5 C
1744990499	12.57 Volt	120 Pkt	66 Pcnt	21.5 C
1744989599	12.27 Volt	120 Pkt	64 Pcnt	22 C
1744988699	12.57 Volt	110 Pkt	62 Pcnt	22 C
1744987799	12.57 Volt	120 Pkt	66 Pcnt	22.5 C
1744986899	12.57 Volt	110 Pkt	66 Pcnt	22.5 C
1744985999	12.35 Volt	120 Pkt	67 Pcnt	23 C
1744985099	12.57 Volt	110 Pkt	70 Pcnt	23 C
1744984199	12.57 Volt	110 Pkt	70 Pcnt	23 C
1744983299	12.49 Volt	110 Pkt	76 Pcnt	24 C
1744982399	11.98 Volt	110 Pkt	77 Pcnt	24 C
1744981499	12.64 Volt	110 Pkt	76 Pcnt	24 C
1744980599	12.71 Volt	110 Pkt	77 Pcnt	24.5 C
1744979699	12.79 Volt	110 Pkt	83 Pcnt	24.5 C
1744978799	12.79 Volt	110 Pkt	87 Pcnt	24 C
1744977900	12.79 Volt	110 Pkt	91 Pcnt	24.5 C
1744976999	12.86 Volt	120 Pkt	93 Pcnt	24 C
1744976100	12.93 Volt	120 Pkt	93 Pcnt	24 C
1744975200	12.79 Volt	120 Pkt	94 Pcnt	24.5 C

*Used Equation Coefficients:

Vin: 0, 0.073, 0.01

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)