APRS Track Direct

My position About ☰

reset

VK7HSE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK7HSE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1754233392	0.02 Rx Erlang	0.08 Tx Erlang	15 count/10m	3 count/10m	53 count/10m
1754232192	0.02 Rx Erlang	0.06 Tx Erlang	15 count/10m	2 count/10m	45 count/10m
1754230992	0.01 Rx Erlang	0.07 Tx Erlang	11 count/10m	1 count/10m	53 count/10m
1754229792	0.01 Rx Erlang	0.06 Tx Erlang	12 count/10m	1 count/10m	46 count/10m
1754228592	0.02 Rx Erlang	0.07 Tx Erlang	15 count/10m	2 count/10m	52 count/10m
1754227392	0.01 Rx Erlang	0.06 Tx Erlang	12 count/10m	0 count/10m	47 count/10m
1754226192	0.01 Rx Erlang	0.07 Tx Erlang	12 count/10m	0 count/10m	49 count/10m
1754224992	0.01 Rx Erlang	0.07 Tx Erlang	13 count/10m	1 count/10m	53 count/10m
1754223792	0.01 Rx Erlang	0.06 Tx Erlang	11 count/10m	1 count/10m	46 count/10m
1754222592	0.01 Rx Erlang	0.07 Tx Erlang	13 count/10m	0 count/10m	49 count/10m
1754221392	0.02 Rx Erlang	0.06 Tx Erlang	16 count/10m	2 count/10m	49 count/10m
1754220192	0.01 Rx Erlang	0.08 Tx Erlang	12 count/10m	0 count/10m	52 count/10m
1754218992	0.02 Rx Erlang	0.07 Tx Erlang	15 count/10m	4 count/10m	52 count/10m
1754217792	0.02 Rx Erlang	0.08 Tx Erlang	9 count/10m	3 count/10m	58 count/10m
1754216592	0 Rx Erlang	0.07 Tx Erlang	1 count/10m	1 count/10m	52 count/10m
1754215392	0 Rx Erlang	0.09 Tx Erlang	0 count/10m	0 count/10m	61 count/10m
1754214192	0.01 Rx Erlang	0.07 Tx Erlang	10 count/10m	5 count/10m	49 count/10m
1754212992	0.02 Rx Erlang	0.08 Tx Erlang	15 count/10m	10 count/10m	54 count/10m
1754211792	0.02 Rx Erlang	0.06 Tx Erlang	17 count/10m	6 count/10m	45 count/10m
1754210592	0.03 Rx Erlang	0.07 Tx Erlang	30 count/10m	7 count/10m	56 count/10m
1754209392	0.03 Rx Erlang	0.07 Tx Erlang	26 count/10m	10 count/10m	47 count/10m
1754208192	0.04 Rx Erlang	0.1 Tx Erlang	27 count/10m	14 count/10m	72 count/10m
1754206992	0.01 Rx Erlang	0.09 Tx Erlang	7 count/10m	3 count/10m	67 count/10m
1754205792	0.04 Rx Erlang	0.08 Tx Erlang	34 count/10m	22 count/10m	64 count/10m
1754204592	0.06 Rx Erlang	0.09 Tx Erlang	46 count/10m	35 count/10m	68 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)