APRS Track Direct

My position About ☰

reset

KW6V-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KW6V-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Shack Temp*	Pi Temp*
1762288285	61 Deg.F	37.4 Deg.C
1762286434	61 Deg.F	37 Deg.C
1762284647	60 Deg.F	37.4 Deg.C
1762282842	60 Deg.F	37 Deg.C
1762281058	60 Deg.F	37.4 Deg.C
1762279253	60 Deg.F	37.4 Deg.C
1762277453	60 Deg.F	37.9 Deg.C
1762275652	60 Deg.F	37 Deg.C
1762273844	60 Deg.F	37 Deg.C
1762272067	59 Deg.F	36.5 Deg.C
1762270257	59 Deg.F	37 Deg.C
1762268462	59 Deg.F	37.4 Deg.C
1762266636	59 Deg.F	36.5 Deg.C
1762264852	59 Deg.F	36 Deg.C
1762263037	59 Deg.F	37 Deg.C
1762261269	59 Deg.F	36.5 Deg.C
1762259436	59 Deg.F	36.5 Deg.C
1762257670	59 Deg.F	37.4 Deg.C
1762255859	59 Deg.F	36.5 Deg.C
1762254062	59 Deg.F	37.4 Deg.C
1762252241	59 Deg.F	36 Deg.C
1762250423	59 Deg.F	36.5 Deg.C
1762248635	59 Deg.F	36.5 Deg.C
1762246887	59 Deg.F	36.5 Deg.C
1762245055	59 Deg.F	36 Deg.C

*Used Equation Coefficients:

Shack Temp: 0, 1, 0

Pi Temp: 0, 0.1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)