APRS Track Direct

My position About ☰

reset

E22KKC-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1762240317	8 Pkt	0 Pkt	-48 dBm	0.02 V
1762238491	8 Pkt	0 Pkt	-44 dBm	0.02 V
1762236666	13 Pkt	1 Pkt	-44 dBm	0.02 V
1762234840	12 Pkt	0 Pkt	-45 dBm	0.02 V
1762233015	9 Pkt	0 Pkt	-45 dBm	0.02 V
1762231190	6 Pkt	0 Pkt	-45 dBm	0.02 V
1762229365	16 Pkt	0 Pkt	-45 dBm	0.02 V
1762227539	72 Pkt	0 Pkt	-45 dBm	0.02 V
1762225713	48 Pkt	0 Pkt	-45 dBm	0.02 V
1762223887	36 Pkt	1 Pkt	-45 dBm	0.02 V
1762222061	39 Pkt	0 Pkt	-46 dBm	0.02 V
1762220235	45 Pkt	0 Pkt	-45 dBm	0.02 V
1762218409	66 Pkt	0 Pkt	-44 dBm	0.02 V
1762216582	66 Pkt	0 Pkt	-45 dBm	0.02 V
1762214756	77 Pkt	1 Pkt	-46 dBm	0.02 V
1762212929	0 Pkt	0 Pkt	-46 dBm	0.02 V
1762211041	19 Pkt	0 Pkt	-45 dBm	0.02 V
1762209215	13 Pkt	0 Pkt	-45 dBm	0.02 V
1762207389	21 Pkt	0 Pkt	-45 dBm	0.02 V
1762205565	24 Pkt	1 Pkt	-46 dBm	0.02 V
1762203738	43 Pkt	1 Pkt	-46 dBm	0.02 V
1762201913	38 Pkt	0 Pkt	-45 dBm	0.02 V
1762200087	45 Pkt	0 Pkt	-46 dBm	0.02 V
1762198261	44 Pkt	0 Pkt	-45 dBm	0.02 V
1762196435	37 Pkt	0 Pkt	-45 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)