This is the latest recevied telemetry packets stored in our database for station/object HS3PQJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1718713412 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.55 V |
1718712394 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.66 V |
1718711375 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.35 V |
1718710357 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.43 V |
1718709339 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.39 V |
1718708321 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.43 V |
1718707303 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.45 V |
1718706285 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.53 V |
1718705266 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.57 V |
1718704248 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.35 V |
1718703230 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.43 V |
1718702212 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.37 V |
1718701193 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.27 V |
1718700175 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.37 V |
1718699157 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.27 V |
1718698139 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.35 V |
1718697121 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.45 V |
1718696102 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.84 V |
1718695084 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.16 V |
1718694066 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.37 V |
1718693048 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.18 V |
1718692030 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.45 V |
1718691011 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.27 V |
1718689993 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.41 V |
1718688975 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.62 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)