This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794909063 | 910 Count | 461 Count | 325 Count | 3.49 VDC | 0.08 VDC |
| 1794905461 | 908 Count | 461 Count | 325 Count | 3.49 VDC | 0.08 VDC |
| 1794903661 | 896 Count | 450 Count | 314 Count | 3.49 VDC | 0.08 VDC |
| 1794901860 | 888 Count | 442 Count | 307 Count | 3.49 VDC | 0.08 VDC |
| 1794900060 | 887 Count | 442 Count | 307 Count | 3.5 VDC | 0.08 VDC |
| 1794896459 | 885 Count | 442 Count | 307 Count | 3.49 VDC | 0.08 VDC |
| 1794894666 | 880 Count | 442 Count | 307 Count | 3.5 VDC | 0.08 VDC |
| 1794892865 | 879 Count | 442 Count | 307 Count | 3.5 VDC | 0.08 VDC |
| 1794891064 | 878 Count | 442 Count | 307 Count | 3.51 VDC | 0.08 VDC |
| 1794889264 | 877 Count | 442 Count | 307 Count | 3.51 VDC | 0.08 VDC |
| 1794887463 | 876 Count | 442 Count | 307 Count | 3.51 VDC | 0.08 VDC |
| 1794883861 | 874 Count | 442 Count | 307 Count | 3.52 VDC | 0.08 VDC |
| 1794882061 | 873 Count | 442 Count | 307 Count | 3.52 VDC | 0.08 VDC |
| 1794880259 | 872 Count | 442 Count | 307 Count | 3.53 VDC | 0.08 VDC |
| 1794876658 | 870 Count | 442 Count | 307 Count | 3.53 VDC | 0.08 VDC |
| 1794873065 | 864 Count | 442 Count | 307 Count | 3.55 VDC | 0.08 VDC |
| 1794871264 | 863 Count | 442 Count | 307 Count | 3.55 VDC | 0.08 VDC |
| 1794867663 | 861 Count | 442 Count | 307 Count | 3.57 VDC | 0.08 VDC |
| 1794865862 | 860 Count | 442 Count | 307 Count | 3.58 VDC | 0.08 VDC |
| 1794864061 | 859 Count | 442 Count | 307 Count | 3.59 VDC | 0.08 VDC |
| 1794862261 | 858 Count | 442 Count | 307 Count | 3.59 VDC | 0.08 VDC |
| 1794860460 | 823 Count | 408 Count | 273 Count | 3.6 VDC | 0.08 VDC |
| 1794858659 | 822 Count | 408 Count | 273 Count | 3.6 VDC | 0.08 VDC |
| 1794856859 | 821 Count | 408 Count | 273 Count | 3.6 VDC | 0.08 VDC |
| 1794855057 | 820 Count | 408 Count | 273 Count | 3.6 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)