APRS Track Direct

My position About ☰

reset

OE3PDB-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1790649068	13.11 Volt	100 Pkt	93 Pcnt	14 Pkt
1790645468	13.11 Volt	90 Pkt	93 Pcnt	13 Pkt
1790641868	13.11 Volt	90 Pkt	91 Pcnt	10 Pkt
1790638268	13.11 Volt	130 Pkt	95 Pcnt	14 Pkt
1790634668	13.11 Volt	110 Pkt	93 Pcnt	10 Pkt
1790631068	13.11 Volt	110 Pkt	92 Pcnt	17 Pkt
1790627468	13.11 Volt	90 Pkt	94 Pcnt	14 Pkt
1790623868	13.11 Volt	100 Pkt	84 Pcnt	13 Pkt
1790620268	13.11 Volt	100 Pkt	86 Pcnt	13 Pkt
1790616668	13.11 Volt	130 Pkt	91 Pcnt	12 Pkt
1790613068	13.11 Volt	150 Pkt	95 Pcnt	18 Pkt
1790609468	13.11 Volt	140 Pkt	92 Pcnt	18 Pkt
1790605868	13.11 Volt	150 Pkt	89 Pcnt	36 Pkt
1790602268	13.11 Volt	110 Pkt	93 Pcnt	13 Pkt
1790598678	13.11 Volt	100 Pkt	91 Pcnt	13 Pkt
1790595069	13.11 Volt	90 Pkt	93 Pcnt	14 Pkt
1790591469	13.11 Volt	90 Pkt	89 Pcnt	13 Pkt
1790587869	13.11 Volt	100 Pkt	91 Pcnt	9 Pkt
1790584269	13.11 Volt	120 Pkt	95 Pcnt	19 Pkt
1790580669	13.11 Volt	120 Pkt	92 Pcnt	14 Pkt
1790577069	13.11 Volt	100 Pkt	93 Pcnt	13 Pkt
1790573469	13.11 Volt	110 Pkt	83 Pcnt	13 Pkt
1790569869	13.11 Volt	100 Pkt	98 Pcnt	11 Pkt
1790566269	13.11 Volt	90 Pkt	93 Pcnt	14 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)