APRS Track Direct

My position About ☰

reset

HS4KGC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4KGC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1750146887	1 Pkt	0 Pkt	-44 dBm	4.53 V
1750146262	9 Pkt	0 Pkt	-45 dBm	4.53 V
1750145637	8 Pkt	0 Pkt	-45 dBm	4.51 V
1750145010	8 Pkt	0 Pkt	-46 dBm	4.53 V
1750144385	5 Pkt	0 Pkt	-46 dBm	4.53 V
1750143760	1 Pkt	0 Pkt	-45 dBm	4.53 V
1750143135	0 Pkt	0 Pkt	-45 dBm	4.53 V
1750142510	6 Pkt	0 Pkt	-45 dBm	4.51 V
1750141884	0 Pkt	0 Pkt	-44 dBm	4.53 V
1750141259	2 Pkt	0 Pkt	-45 dBm	4.51 V
1750140634	7 Pkt	0 Pkt	-45 dBm	4.53 V
1750140009	0 Pkt	0 Pkt	-44 dBm	4.51 V
1750139383	0 Pkt	0 Pkt	-45 dBm	4.51 V
1750138757	0 Pkt	1 Pkt	-43 dBm	4.53 V
1750138131	0 Pkt	0 Pkt	-44 dBm	4.53 V
1750137505	0 Pkt	0 Pkt	-44 dBm	4.53 V
1750136880	0 Pkt	0 Pkt	-53 dBm	4.53 V
1750136255	0 Pkt	0 Pkt	-51 dBm	4.53 V
1750135629	0 Pkt	0 Pkt	-51 dBm	4.53 V
1750135004	0 Pkt	0 Pkt	-46 dBm	4.53 V
1750134378	0 Pkt	0 Pkt	-47 dBm	4.53 V
1750133753	0 Pkt	0 Pkt	-54 dBm	4.53 V
1750133128	0 Pkt	0 Pkt	-45 dBm	4.47 V
1750132502	0 Pkt	0 Pkt	-46 dBm	4.53 V
1750131877	0 Pkt	1 Pkt	-43 dBm	4.53 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)