This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786725795 | 26 Count | 173 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786724895 | 25 Count | 167 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786723991 | 24 Count | 159 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786723087 | 23 Count | 153 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786722179 | 22 Count | 147 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786721275 | 21 Count | 141 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786720375 | 20 Count | 134 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786718563 | 18 Count | 113 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786717663 | 17 Count | 109 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786716755 | 16 Count | 104 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786715949 | 15 Count | 99 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786715045 | 14 Count | 94 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786714141 | 13 Count | 90 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786712333 | 11 Count | 74 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786708714 | 7 Count | 47 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786707810 | 6 Count | 41 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786706906 | 5 Count | 34 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786706006 | 4 Count | 29 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786704198 | 2 Count | 15 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786702386 | 0 Count | 5 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786701486 | 151 Count | 1004 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786700582 | 150 Count | 997 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786699678 | 149 Count | 990 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786698774 | 148 Count | 983 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1786697871 | 147 Count | 975 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)