APRS Track Direct

My position About ☰

reset

OE3MZC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3MZC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*	RX10m*	Total*
1732293667	580 Pkt	76 Pcnt	94 Pkt	79 Prcnt
1732293367	580 Pkt	76 Pcnt	92 Pkt	79 Prcnt
1732293066	600 Pkt	76 Pcnt	85 Pkt	79 Prcnt
1732292766	610 Pkt	76 Pcnt	94 Pkt	79 Prcnt
1732292466	630 Pkt	76 Pcnt	95 Pkt	79 Prcnt
1732292166	650 Pkt	77 Pcnt	78 Pkt	79 Prcnt
1732291865	650 Pkt	77 Pcnt	94 Pkt	79 Prcnt
1732291565	660 Pkt	77 Pcnt	102 Pkt	79 Prcnt
1732291265	670 Pkt	78 Pcnt	95 Pkt	79 Prcnt
1732290965	670 Pkt	78 Pcnt	91 Pkt	79 Prcnt
1732290664	660 Pkt	78 Pcnt	108 Pkt	79 Prcnt
1732290364	670 Pkt	79 Pcnt	120 Pkt	79 Prcnt
1732290063	660 Pkt	80 Pcnt	118 Pkt	79 Prcnt
1732289763	660 Pkt	80 Pcnt	119 Pkt	79 Prcnt
1732289463	650 Pkt	80 Pcnt	110 Pkt	79 Prcnt
1732289163	630 Pkt	79 Pcnt	127 Pkt	79 Prcnt
1732288862	620 Pkt	79 Pcnt	117 Pkt	79 Prcnt
1732288562	600 Pkt	78 Pcnt	91 Pkt	79 Prcnt
1732288262	600 Pkt	79 Pcnt	118 Pkt	79 Prcnt
1732287961	590 Pkt	78 Pcnt	109 Pkt	79 Prcnt
1732287661	570 Pkt	77 Pcnt	81 Pkt	79 Prcnt
1732287361	580 Pkt	78 Pcnt	100 Pkt	79 Prcnt
1732287061	590 Pkt	78 Pcnt	116 Pkt	79 Prcnt
1732286760	570 Pkt	78 Pcnt	105 Pkt	79 Prcnt
1732286460	570 Pkt	78 Pcnt	103 Pkt	79 Prcnt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

RX10m: 0, 1, 0

Total: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)