APRS Track Direct

My position About ☰

reset

OK1WJW-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1WJW-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274584	12.53 Volt	110 Pkt	50 Pkt	83 Pcnt
1836274583	12.53 Volt	110 Pkt	50 Pkt	83 Pcnt
1836274434	12.53 Volt	120 Pkt	60 Pkt	86 Pcnt
1836274433	12.53 Volt	120 Pkt	60 Pkt	86 Pcnt
1836274283	12.53 Volt	120 Pkt	60 Pkt	82 Pcnt
1836274133	12.53 Volt	120 Pkt	50 Pkt	86 Pcnt
1836273983	12.53 Volt	120 Pkt	60 Pkt	80 Pcnt
1766169430	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766168830	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766168230	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766167630	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766167030	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766166430	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766165830	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766165230	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766164030	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766163430	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766162830	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766162230	12.53 Volt	0 Pkt	0 Pkt	100 Pcnt
1766161030	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766159830	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766159230	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766158630	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766158030	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt
1766156830	12.53 Volt	0 Pkt	0 Pkt	0 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)