This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Vsolar* | SunElev* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754531334 | -0.02 degC | 0 Volts | 19.42 deg | 0 | 0 |
| 1754530331 | -0.02 degC | 0 Volts | 22.18 deg | 0 | 0 |
| 1754529225 | -0.02 degC | 0 Volts | 25.19 deg | 0 | 0 |
| 1754528963 | -0.02 degC | 0 Volts | 25.91 deg | 0 | 0 |
| 1754528698 | -0.02 degC | 0 Volts | 26.63 deg | 0 | 0 |
| 1754528433 | -0.02 degC | 0 Volts | 27.35 deg | 0 | 0 |
| 1754528168 | -0.02 degC | 0 Volts | 28.08 deg | 0 | 0 |
| 1754527210 | -0.02 degC | 0 Volts | 30.74 deg | 0 | 0 |
| 1754526945 | -0.02 degC | 0 Volts | 31.46 deg | 0 | 0 |
| 1754526690 | -0.02 degC | 0 Volts | 32.15 deg | 0 | 0 |
| 1754526424 | -0.02 degC | 0 Volts | 32.94 deg | 0 | 0 |
| 1754526166 | -0.02 degC | 0 Volts | 33.63 deg | 0 | 0 |
| 1754525647 | -0.02 degC | 0 Volts | 35.07 deg | 0 | 0 |
| 1754525096 | -0.02 degC | 0 Volts | 36.55 deg | 0 | 0 |
| 1754524824 | -0.02 degC | 0 Volts | 37.27 deg | 0 | 0 |
| 1754524284 | -0.02 degC | 0 Volts | 38.74 deg | 0 | 0 |
| 1754524015 | -0.02 degC | 0 Volts | 39.46 deg | 0 | 0 |
| 1754523738 | -0.02 degC | 0 Volts | 40.18 deg | 0 | 0 |
| 1754523469 | -0.02 degC | 0 Volts | 40.91 deg | 0 | 0 |
| 1754523201 | -0.02 degC | 0 Volts | 41.63 deg | 0 | 0 |
| 1754522937 | -0.02 degC | 0 Volts | 42.32 deg | 0 | 0 |
| 1754522665 | -0.02 degC | 0 Volts | 43.04 deg | 0 | 0 |
| 1754522136 | -0.02 degC | 0 Volts | 44.36 deg | 0 | 0 |
| 1754521876 | -0.02 degC | 0 Volts | 45.02 deg | 0 | 0 |
| 1754521354 | -0.02 degC | 0 Volts | 46.3 deg | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.43, -80
Vsolar: 0, 0.1, 0
SunElev: 0, 0.3137, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)