This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754396413 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1754395813 | 0 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1754395213 | 0 Count | 635 Count | 0 Count | 0 VDC | 0 VDC |
| 1754394613 | 0 Count | 630 Count | 0 Count | 0 VDC | 0 VDC |
| 1754394013 | 0 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1754393413 | 0 Count | 626 Count | 0 Count | 0 VDC | 0 VDC |
| 1754392813 | 0 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1754392213 | 0 Count | 624 Count | 0 Count | 0 VDC | 0 VDC |
| 1754391613 | 0 Count | 623 Count | 0 Count | 0 VDC | 0 VDC |
| 1754391013 | 0 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1754390413 | 0 Count | 618 Count | 0 Count | 0 VDC | 0 VDC |
| 1754389813 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1754389213 | 0 Count | 584 Count | 0 Count | 0 VDC | 0 VDC |
| 1754388613 | 0 Count | 584 Count | 0 Count | 0 VDC | 0 VDC |
| 1754388013 | 0 Count | 583 Count | 0 Count | 0 VDC | 0 VDC |
| 1754387412 | 0 Count | 576 Count | 0 Count | 0 VDC | 0 VDC |
| 1754386812 | 0 Count | 559 Count | 0 Count | 0 VDC | 0 VDC |
| 1754386212 | 0 Count | 546 Count | 0 Count | 0 VDC | 0 VDC |
| 1754385612 | 0 Count | 539 Count | 0 Count | 0 VDC | 0 VDC |
| 1754385012 | 0 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1754384412 | 0 Count | 524 Count | 0 Count | 0 VDC | 0 VDC |
| 1754383812 | 0 Count | 519 Count | 0 Count | 0 VDC | 0 VDC |
| 1754383212 | 0 Count | 511 Count | 0 Count | 0 VDC | 0 VDC |
| 1754382612 | 0 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1754382012 | 0 Count | 476 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)