This is the latest recevied telemetry packets stored in our database for station/object SP2KMH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1732292340 | 12.6 Volt | 390 Pkt | 140 Pkt | 89 Pcnt | 0 None |
1732290958 | 12.6 Volt | 380 Pkt | 150 Pkt | 88 Pcnt | 0 None |
1732289578 | 12.15 Volt | 380 Pkt | 160 Pkt | 84 Pcnt | 0 None |
1732288196 | 12.6 Volt | 280 Pkt | 120 Pkt | 66 Pcnt | 0 None |
1732286814 | 12.6 Volt | 170 Pkt | 90 Pkt | 44 Pcnt | 0 None |
1732285433 | 12.6 Volt | 80 Pkt | 60 Pkt | 26 Pcnt | 0 None |
1732284054 | 12.6 Volt | 140 Pkt | 80 Pkt | 38 Pcnt | 0 None |
1732282670 | 12.6 Volt | 140 Pkt | 70 Pkt | 36 Pcnt | 0 None |
1732281289 | 12.6 Volt | 130 Pkt | 60 Pkt | 33 Pcnt | 0 None |
1732279908 | 12.6 Volt | 100 Pkt | 60 Pkt | 30 Pcnt | 0 None |
1732278527 | 12.6 Volt | 140 Pkt | 70 Pkt | 43 Pcnt | 0 None |
1732277145 | 12.6 Volt | 170 Pkt | 70 Pkt | 60 Pcnt | 0 None |
1732275764 | 12.6 Volt | 90 Pkt | 40 Pkt | 47 Pcnt | 0 None |
1732274383 | 12.6 Volt | 60 Pkt | 40 Pkt | 49 Pcnt | 0 None |
1732273001 | 12.6 Volt | 60 Pkt | 40 Pkt | 34 Pcnt | 0 None |
1732271620 | 12.6 Volt | 90 Pkt | 60 Pkt | 40 Pcnt | 0 None |
1732270239 | 12.6 Volt | 150 Pkt | 70 Pkt | 52 Pcnt | 0 None |
1732268859 | 12.6 Volt | 220 Pkt | 80 Pkt | 63 Pcnt | 0 None |
1732267476 | 12.6 Volt | 280 Pkt | 90 Pkt | 68 Pcnt | 0 None |
1732266095 | 12.6 Volt | 320 Pkt | 90 Pkt | 70 Pcnt | 0 None |
1732264713 | 12.6 Volt | 300 Pkt | 80 Pkt | 73 Pcnt | 0 None |
1732263332 | 12.6 Volt | 310 Pkt | 90 Pkt | 80 Pcnt | 0 None |
1732261951 | 12.6 Volt | 300 Pkt | 110 Pkt | 84 Pcnt | 0 None |
1732260569 | 12.6 Volt | 300 Pkt | 140 Pkt | 77 Pcnt | 0 None |
1732259188 | 12.6 Volt | 270 Pkt | 130 Pkt | 72 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)