This is the latest recevied telemetry packets stored in our database for station/object DK9PS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790636238 | 23.7 deg C | 47.9 % | 0 | 0 | 0 |
| 1790635338 | 23.8 deg C | 47.8 % | 0 | 0 | 0 |
| 1790634438 | 23.8 deg C | 47.9 % | 0 | 0 | 0 |
| 1790633537 | 23.9 deg C | 47.9 % | 0 | 0 | 0 |
| 1790632637 | 23.9 deg C | 47.8 % | 0 | 0 | 0 |
| 1790631737 | 24 deg C | 47.8 % | 0 | 0 | 0 |
| 1790630837 | 24.1 deg C | 47.8 % | 0 | 0 | 0 |
| 1790629937 | 24.1 deg C | 47.7 % | 0 | 0 | 0 |
| 1790629037 | 24.2 deg C | 47.5 % | 0 | 0 | 0 |
| 1790628137 | 24.3 deg C | 47.5 % | 0 | 0 | 0 |
| 1790627237 | 24.4 deg C | 47.4 % | 0 | 0 | 0 |
| 1790626337 | 24.4 deg C | 47.3 % | 0 | 0 | 0 |
| 1790626040 | 24.5 deg C | 47.3 % | 0 | 0 | 0 |
| 1790625140 | 24.6 deg C | 47.3 % | 0 | 0 | 0 |
| 1790624240 | 24.7 deg C | 47.3 % | 0 | 0 | 0 |
| 1790623340 | 24.8 deg C | 47.2 % | 0 | 0 | 0 |
| 1790622440 | 25 deg C | 47.1 % | 0 | 0 | 0 |
| 1790621540 | 25.1 deg C | 46.9 % | 0 | 0 | 0 |
| 1790620640 | 25.3 deg C | 46.8 % | 0 | 0 | 0 |
| 1790619739 | 25.6 deg C | 47.2 % | 0 | 0 | 0 |
| 1790618822 | 25.6 deg C | 47.4 % | 0 | 0 | 0 |
| 1790617002 | 25.7 deg C | 47.3 % | 0 | 0 | 0 |
| 1790616102 | 25.8 deg C | 47.6 % | 0 | 0 | 0 |
| 1790615204 | 26 deg C | 48.2 % | 0 | 0 | 0 |
| 1790614302 | 26.2 deg C | 47 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)