This is the latest recevied telemetry packets stored in our database for station/object VE5XW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790613247 | 552 | 593 | 584 | 554 | 0 |
| 1790612650 | 551 | 593 | 583 | 574 | 0 |
| 1790612048 | 566 | 593 | 581 | 584 | 0 |
| 1790611448 | 545 | 592 | 580 | 576 | 0 |
| 1790610847 | 538 | 593 | 580 | 572 | 0 |
| 1790610249 | 530 | 592 | 579 | 570 | 0 |
| 1790609648 | 525 | 592 | 578 | 563 | 0 |
| 1790609048 | 521 | 592 | 578 | 558 | 0 |
| 1790608448 | 517 | 591 | 578 | 551 | 0 |
| 1790607848 | 512 | 591 | 577 | 545 | 0 |
| 1790607249 | 507 | 591 | 577 | 541 | 0 |
| 1790606647 | 501 | 591 | 575 | 536 | 0 |
| 1790606047 | 496 | 591 | 574 | 526 | 0 |
| 1790605448 | 490 | 591 | 573 | 522 | 0 |
| 1790604848 | 486 | 591 | 572 | 516 | 0 |
| 1790604247 | 483 | 591 | 571 | 511 | 0 |
| 1790603649 | 480 | 591 | 570 | 505 | 0 |
| 1790603048 | 479 | 591 | 570 | 503 | 0 |
| 1790602448 | 478 | 591 | 569 | 498 | 0 |
| 1790601846 | 477 | 591 | 568 | 494 | 0 |
| 1790601247 | 476 | 591 | 569 | 493 | 0 |
| 1790600648 | 476 | 591 | 569 | 499 | 0 |
| 1790600047 | 476 | 591 | 569 | 497 | 0 |
| 1790599447 | 476 | 591 | 568 | 496 | 0 |
| 1790598846 | 476 | 591 | 569 | 500 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)