This is the latest recevied telemetry packets stored in our database for station/object OH2GYT-T1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | rsrp1* | rsrp2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758219037 | -90 dBm | -104 dBm | 0 | 0 | 0 |
| 1758218453 | -90 dBm | -106 dBm | 0 | 0 | 0 |
| 1758217848 | -90 dBm | -106 dBm | 0 | 0 | 0 |
| 1758217244 | -91 dBm | -101 dBm | 0 | 0 | 0 |
| 1758216634 | -92 dBm | -106 dBm | 0 | 0 | 0 |
| 1758216034 | -93 dBm | -99 dBm | 0 | 0 | 0 |
| 1758215449 | -91 dBm | -98 dBm | 0 | 0 | 0 |
| 1758214838 | -91 dBm | -100 dBm | 0 | 0 | 0 |
| 1758214242 | -90 dBm | -99 dBm | 0 | 0 | 0 |
| 1758213639 | -90 dBm | -98 dBm | 0 | 0 | 0 |
| 1758213035 | -91 dBm | -99 dBm | 0 | 0 | 0 |
| 1758212419 | -91 dBm | -102 dBm | 0 | 0 | 0 |
| 1758211849 | -92 dBm | -97 dBm | 0 | 0 | 0 |
| 1758211247 | -91 dBm | -102 dBm | 0 | 0 | 0 |
| 1758210650 | -90 dBm | -101 dBm | 0 | 0 | 0 |
| 1758210050 | -90 dBm | -100 dBm | 0 | 0 | 0 |
| 1758209454 | -91 dBm | -96 dBm | 0 | 0 | 0 |
| 1758208834 | -90 dBm | -95 dBm | 0 | 0 | 0 |
| 1758208240 | -90 dBm | -97 dBm | 0 | 0 | 0 |
| 1758207617 | -90 dBm | -77 dBm | 0 | 0 | 0 |
| 1758207018 | -90 dBm | -81 dBm | 0 | 0 | 0 |
| 1758206451 | -91 dBm | -79 dBm | 0 | 0 | 0 |
| 1758205841 | -92 dBm | -78 dBm | 0 | 0 | 0 |
| 1758205253 | -92 dBm | -79 dBm | 0 | 0 | 0 |
| 1758204660 | -92 dBm | -74 dBm | 0 | 0 | 0 |
*Used Equation Coefficients:
rsrp1: 0, -1, 0
rsrp2: 0, -1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)