This is the latest recevied telemetry packets stored in our database for station/object SA5KJA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794911413 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794910512 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794909612 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794908712 | 0.78 VDC | 0 | 0 | 0 | 0 |
| 1794907812 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794906912 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794906012 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794905112 | 0.94 VDC | 0 | 0 | 0 | 0 |
| 1794904212 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794903311 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794902411 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794901511 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794900611 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794899711 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794898811 | 0.94 VDC | 0 | 0 | 0 | 0 |
| 1794897911 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1794897011 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794896111 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794895210 | 0.9 VDC | 0 | 0 | 0 | 0 |
| 1794894310 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794893410 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1794892510 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794891610 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794890710 | 0.92 VDC | 0 | 0 | 0 | 0 |
| 1794889810 | 0.92 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)