This is the latest recevied telemetry packets stored in our database for station/object KQ6NO-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Array V* | Bus V* | Batt I* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745049202 | 0 Volts | 12.65 Volts | -0.21 Amps | 0 | 0 |
| 1745048302 | 0 Volts | 12.65 Volts | -0.21 Amps | 0 | 0 |
| 1745047404 | 0 Volts | 12.65 Volts | -0.21 Amps | 0 | 0 |
| 1745046447 | - | - | - | - | - |
| 1745046444 | 0 Volts | 12.65 Volts | -0.21 Amps | 0 | 0 |
| 1745045544 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745044647 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745043746 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745042786 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745041887 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745040987 | 0 Volts | 12.71 Volts | -0.21 Amps | 0 | 0 |
| 1745040088 | 0 Volts | 12.77 Volts | -0.21 Amps | 0 | 0 |
| 1745039128 | 0 Volts | 12.77 Volts | -0.21 Amps | 0 | 0 |
| 1745038230 | 0 Volts | 12.77 Volts | -0.21 Amps | 0 | 0 |
| 1745037330 | 0 Volts | 12.77 Volts | -0.21 Amps | 0 | 0 |
| 1745036431 | 0 Volts | 12.77 Volts | -0.21 Amps | 0 | 0 |
| 1745035472 | 0 Volts | 12.83 Volts | -0.21 Amps | 0 | 0 |
| 1745034573 | 0 Volts | 12.83 Volts | -0.21 Amps | 0 | 0 |
| 1745033673 | 0 Volts | 12.83 Volts | -0.21 Amps | 0 | 0 |
| 1745032773 | 0 Volts | 12.89 Volts | -0.21 Amps | 0 | 0 |
| 1745031814 | 0 Volts | 12.89 Volts | -0.21 Amps | 0 | 0 |
| 1745030914 | 0.54 Volts | 12.89 Volts | -0.21 Amps | 0 | 0 |
| 1745029116 | 12.96 Volts | 12.95 Volts | -0.23 Amps | 0 | 0 |
| 1745028157 | 13.05 Volts | 13.01 Volts | -0.23 Amps | 0 | 0 |
| 1745027258 | 13.05 Volts | 13.01 Volts | -0.21 Amps | 0 | 0 |
*Used Equation Coefficients:
Array V: 0, 0.09, 0
Bus V: 0, 0.0608, 0
Batt I: 0, 0.0215, -2.08
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)