APRS Track Direct

My position About ☰

reset

XE2VP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2VP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758210972	13.43 Volt	290 Pkt	180 Pkt	57 Pcnt	-64 C
1758210072	13.43 Volt	320 Pkt	180 Pkt	56 Pcnt	-64 C
1758209172	13.43 Volt	320 Pkt	180 Pkt	59 Pcnt	-64 C
1758208272	13.5 Volt	330 Pkt	170 Pkt	62 Pcnt	-64 C
1758207372	12.98 Volt	340 Pkt	180 Pkt	63 Pcnt	-64 C
1758206472	13.35 Volt	310 Pkt	170 Pkt	62 Pcnt	-64 C
1758205572	13.2 Volt	310 Pkt	180 Pkt	63 Pcnt	-64 C
1758204672	13.13 Volt	300 Pkt	180 Pkt	64 Pcnt	-64 C
1758202872	12.98 Volt	250 Pkt	150 Pkt	62 Pcnt	-64 C
1758201972	12.9 Volt	220 Pkt	130 Pkt	59 Pcnt	-64 C
1758201072	12.83 Volt	170 Pkt	100 Pkt	53 Pcnt	-64 C
1758200172	12.83 Volt	150 Pkt	90 Pkt	50 Pcnt	-64 C
1758199272	12.68 Volt	150 Pkt	80 Pkt	52 Pcnt	-64 C
1758198372	12.83 Volt	190 Pkt	90 Pkt	55 Pcnt	-64 C
1758197472	12.83 Volt	230 Pkt	110 Pkt	61 Pcnt	-64 C
1758195672	12.83 Volt	270 Pkt	110 Pkt	64 Pcnt	-64 C
1758193872	12.9 Volt	270 Pkt	120 Pkt	68 Pcnt	-64 C
1758192973	12.9 Volt	270 Pkt	120 Pkt	66 Pcnt	-64 C
1758192073	12.9 Volt	220 Pkt	110 Pkt	64 Pcnt	-64 C
1758190273	12.9 Volt	120 Pkt	70 Pkt	53 Pcnt	-64 C
1758188473	12.9 Volt	130 Pkt	80 Pkt	54 Pcnt	-64 C
1758187573	12.9 Volt	130 Pkt	80 Pkt	51 Pcnt	-64 C
1758186673	12.9 Volt	130 Pkt	80 Pkt	52 Pcnt	-64 C
1758185773	12.98 Volt	120 Pkt	70 Pkt	55 Pcnt	-64 C
1758184873	12.98 Volt	110 Pkt	70 Pkt	55 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)