This is the latest recevied telemetry packets stored in our database for station/object PJUAQI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | AQI* | PM2.5* | PM10* | ---* | ---* |
|---|---|---|---|---|---|
| 1752777188 | 2 index | 18 ug/m3 | 27 ug/m3 | 0 | 0 |
| 1752775388 | 2 index | 18 ug/m3 | 26 ug/m3 | 0 | 0 |
| 1752774651 | 2 index | 18 ug/m3 | 26 ug/m3 | 0 | 0 |
| 1752772851 | 2 index | 18 ug/m3 | 26 ug/m3 | 0 | 0 |
| 1752771051 | 2 index | 18 ug/m3 | 26 ug/m3 | 0 | 0 |
| 1752769251 | 2 index | 17 ug/m3 | 25 ug/m3 | 0 | 0 |
| 1752767451 | 2 index | 17 ug/m3 | 25 ug/m3 | 0 | 0 |
| 1752765651 | 2 index | 16 ug/m3 | 24 ug/m3 | 0 | 0 |
| 1752763850 | 2 index | 16 ug/m3 | 24 ug/m3 | 0 | 0 |
| 1752762050 | 2 index | 15 ug/m3 | 21 ug/m3 | 0 | 0 |
| 1752760250 | 2 index | 15 ug/m3 | 21 ug/m3 | 0 | 0 |
| 1752758450 | 2 index | 13 ug/m3 | 18 ug/m3 | 0 | 0 |
| 1752756650 | 1 index | 6 ug/m3 | 11 ug/m3 | 0 | 0 |
| 1752754849 | 1 index | 5 ug/m3 | 9 ug/m3 | 0 | 0 |
| 1752753049 | 1 index | 5 ug/m3 | 9 ug/m3 | 0 | 0 |
| 1752751249 | 1 index | 4 ug/m3 | 7 ug/m3 | 0 | 0 |
| 1752749449 | 1 index | 4 ug/m3 | 7 ug/m3 | 0 | 0 |
| 1752747649 | 1 index | 3 ug/m3 | 5 ug/m3 | 0 | 0 |
| 1752745848 | 1 index | 3 ug/m3 | 5 ug/m3 | 0 | 0 |
| 1752744048 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
| 1752742248 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
| 1752740448 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
| 1752738648 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
| 1752736848 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
| 1752735048 | 1 index | 3 ug/m3 | 4 ug/m3 | 0 | 0 |
*Used Equation Coefficients:
AQI: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
---: 0, 0, 0
---: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)