APRS Track Direct

My position About ☰

reset

KB4KY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB4KY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1744042094	13.35 Volt	760 Pkt	180 Pkt	67 Pcnt
1744041193	13.5 Volt	770 Pkt	190 Pkt	66 Pcnt
1744040292	13.5 Volt	800 Pkt	200 Pkt	65 Pcnt
1744039394	13.42 Volt	820 Pkt	220 Pkt	65 Pcnt
1744038494	13.35 Volt	850 Pkt	230 Pkt	65 Pcnt
1744037598	13.5 Volt	930 Pkt	240 Pkt	67 Pcnt
1744036696	13.5 Volt	990 Pkt	240 Pkt	68 Pcnt
1744035790	13.42 Volt	1050 Pkt	260 Pkt	70 Pcnt
1744033998	13.42 Volt	1190 Pkt	260 Pkt	73 Pcnt
1744033094	13.42 Volt	1250 Pkt	280 Pkt	76 Pcnt
1744032191	13.42 Volt	1260 Pkt	270 Pkt	76 Pcnt
1744031291	13.42 Volt	1230 Pkt	290 Pkt	75 Pcnt
1744030389	13.42 Volt	1210 Pkt	290 Pkt	75 Pcnt
1744029485	13.42 Volt	1140 Pkt	280 Pkt	74 Pcnt
1744028585	13.42 Volt	1080 Pkt	270 Pkt	73 Pcnt
1744027692	13.42 Volt	1030 Pkt	250 Pkt	71 Pcnt
1744026778	13.5 Volt	950 Pkt	220 Pkt	66 Pcnt
1744025892	13.42 Volt	880 Pkt	210 Pkt	62 Pcnt
1744024075	13.35 Volt	760 Pkt	180 Pkt	53 Pcnt
1744023189	13.42 Volt	730 Pkt	180 Pkt	52 Pcnt
1744021431	13.42 Volt	790 Pkt	190 Pkt	54 Pcnt
1744020484	13.42 Volt	820 Pkt	190 Pkt	55 Pcnt
1744019574	13.42 Volt	850 Pkt	200 Pkt	56 Pcnt
1744018691	13.42 Volt	850 Pkt	210 Pkt	55 Pcnt
1744016877	13.42 Volt	770 Pkt	190 Pkt	54 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.07715, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)