This is the latest recevied telemetry packets stored in our database for station/object DC5WT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750231062 | 33.8 deg C | 38.8 % | 1021.7 hPa | 0 | 0 |
| 1750230162 | 32.6 deg C | 41.3 % | 1021.9 hPa | 0 | 0 |
| 1750229261 | 31.3 deg C | 42.1 % | 1021.9 hPa | 0 | 0 |
| 1750228361 | 30.1 deg C | 46.1 % | 1022 hPa | 0 | 0 |
| 1750227461 | 28.7 deg C | 47.8 % | 1022.1 hPa | 0 | 0 |
| 1750226561 | 27 deg C | 51 % | 1022.4 hPa | 0 | 0 |
| 1750225661 | 25.3 deg C | 53.7 % | 1022.6 hPa | 0 | 0 |
| 1750224761 | 23.5 deg C | 55.6 % | 1022.6 hPa | 0 | 0 |
| 1750223861 | 22.3 deg C | 57.8 % | 1022.7 hPa | 0 | 0 |
| 1750222961 | 20.4 deg C | 60.6 % | 1023.1 hPa | 0 | 0 |
| 1750222061 | 18.3 deg C | 60.9 % | 1023.3 hPa | 0 | 0 |
| 1750221161 | 16.3 deg C | 61.4 % | 1023.4 hPa | 0 | 0 |
| 1750220260 | 14.3 deg C | 61.3 % | 1023.6 hPa | 0 | 0 |
| 1750219360 | 13.1 deg C | 61.9 % | 1023.6 hPa | 0 | 0 |
| 1750218461 | 12.9 deg C | 59.4 % | 1023.5 hPa | 0 | 0 |
| 1750217560 | 12.8 deg C | 59 % | 1023.6 hPa | 0 | 0 |
| 1750216660 | 12.9 deg C | 58.6 % | 1023.6 hPa | 0 | 0 |
| 1750215760 | 13 deg C | 58.9 % | 1023.5 hPa | 0 | 0 |
| 1750214860 | 13.2 deg C | 58.3 % | 1023.4 hPa | 0 | 0 |
| 1750213960 | 13.4 deg C | 59.1 % | 1023.3 hPa | 0 | 0 |
| 1750213060 | 13.6 deg C | 58.7 % | 1023.2 hPa | 0 | 0 |
| 1750212160 | 13.7 deg C | 58.2 % | 1023.2 hPa | 0 | 0 |
| 1750211260 | 14 deg C | 56.2 % | 1023.3 hPa | 0 | 0 |
| 1750210360 | 14.2 deg C | 55.7 % | 1023.4 hPa | 0 | 0 |
| 1750209460 | 14.4 deg C | 55.7 % | 1023.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)