APRS Track Direct

My position About ☰

reset

IK2ZJU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2ZJU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxPkt*	TxPkt*	Batt*	Ampere Aux*
1762319923	61 Pkt/10m	61 Pkt/10m	3.92 Volt	0 Ampere
1762318720	41 Pkt/10m	41 Pkt/10m	3.92 Volt	0 Ampere
1762317517	30 Pkt/10m	30 Pkt/10m	3.92 Volt	-0.01 Ampere
1762316313	28 Pkt/10m	28 Pkt/10m	3.92 Volt	0 Ampere
1762315110	17 Pkt/10m	17 Pkt/10m	3.92 Volt	0 Ampere
1762313906	22 Pkt/10m	22 Pkt/10m	3.92 Volt	0 Ampere
1762312703	26 Pkt/10m	26 Pkt/10m	3.92 Volt	-0.01 Ampere
1762311499	33 Pkt/10m	33 Pkt/10m	3.92 Volt	-0.01 Ampere
1762310296	25 Pkt/10m	25 Pkt/10m	3.9 Volt	-0.01 Ampere
1762309092	34 Pkt/10m	34 Pkt/10m	3.94 Volt	0 Ampere
1762307889	29 Pkt/10m	27 Pkt/10m	3.92 Volt	-0.01 Ampere
1762306685	27 Pkt/10m	27 Pkt/10m	3.9 Volt	0 Ampere
1762305487	31 Pkt/10m	31 Pkt/10m	3.92 Volt	-0.01 Ampere
1762304278	28 Pkt/10m	28 Pkt/10m	3.9 Volt	-0.01 Ampere
1762303075	29 Pkt/10m	29 Pkt/10m	3.9 Volt	0 Ampere
1762301871	31 Pkt/10m	31 Pkt/10m	3.9 Volt	0 Ampere
1762300667	29 Pkt/10m	29 Pkt/10m	3.92 Volt	-0.01 Ampere
1762299463	30 Pkt/10m	29 Pkt/10m	3.94 Volt	-0.01 Ampere
1762298259	25 Pkt/10m	25 Pkt/10m	3.92 Volt	-0.01 Ampere
1762297055	23 Pkt/10m	22 Pkt/10m	3.92 Volt	0 Ampere
1762295851	23 Pkt/10m	22 Pkt/10m	3.92 Volt	-0.01 Ampere
1762294647	33 Pkt/10m	32 Pkt/10m	3.9 Volt	0 Ampere
1762293443	28 Pkt/10m	26 Pkt/10m	3.9 Volt	-0.01 Ampere
1762292239	25 Pkt/10m	24 Pkt/10m	3.92 Volt	0 Ampere
1762291035	27 Pkt/10m	25 Pkt/10m	3.94 Volt	-0.01 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)