This is the latest recevied telemetry packets stored in our database for station/object EA4CZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786729501 | 12.43 | 32.8 | 31 | 367 | 0 |
| 1786728600 | 12.41 | 32.7 | 29 | 363 | 0 |
| 1786727700 | 12.46 | 33.6 | 28 | 361 | 0 |
| 1786726801 | 12.48 | 35.7 | 22 | 365 | 0 |
| 1786725901 | 12.49 | 36 | 22 | 364 | 0 |
| 1786725000 | 12.51 | 37.5 | 20 | 361 | 0 |
| 1786724100 | 12.54 | 36.8 | 22 | 360 | 0 |
| 1786723201 | 12.58 | 35.2 | 23 | 363 | 0 |
| 1786722300 | 12.93 | 35.4 | 23 | 366 | 0 |
| 1786721400 | 12.58 | 35.9 | 22 | 363 | 0 |
| 1786720500 | 13.39 | 35.2 | 24 | 357 | 0 |
| 1786719601 | 13.53 | 35.4 | 24 | 359 | 0 |
| 1786717800 | 12.8 | 35.9 | 23 | 360 | 0 |
| 1786716001 | 14.22 | 35.2 | 26 | 359 | 0 |
| 1786715100 | 14.24 | 35.1 | 26 | 362 | 0 |
| 1786713301 | 14.24 | 34.1 | 28 | 366 | 0 |
| 1786712400 | 14.16 | 34.1 | 29 | 363 | 0 |
| 1786711500 | 13.99 | 33.3 | 29 | 367 | 0 |
| 1786708800 | 13.64 | 32.5 | 31 | 366 | 0 |
| 1786707900 | 13.54 | 32.8 | 31 | 365 | 0 |
| 1786707001 | 13.45 | 32.5 | 31 | 363 | 0 |
| 1786706100 | 13.34 | 32.2 | 32 | 366 | 0 |
| 1786705200 | 13.28 | 31 | 33 | 359 | 0 |
| 1786704300 | 12.68 | 30.9 | 36 | 358 | 0 |
| 1786703401 | 13.14 | 29.3 | 40 | 361 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)