This is the latest recevied telemetry packets stored in our database for station/object METHOD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Dg10m* |
|---|---|---|---|---|---|
| 1794904284 | 13.98 Volt | 390 Pkt | 60 Pkt | 88 Pcnt | 450 Pkts |
| 1794904283 | 13.98 Volt | 390 Pkt | 60 Pkt | 88 Pcnt | 450 Pkts |
| 1794903684 | 13.98 Volt | 400 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794903683 | 13.98 Volt | 400 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794903084 | 13.98 Volt | 400 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794903083 | 13.98 Volt | 400 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794902484 | 13.98 Volt | 390 Pkt | 50 Pkt | 88 Pcnt | 460 Pkts |
| 1794902483 | 13.98 Volt | 390 Pkt | 50 Pkt | 88 Pcnt | 460 Pkts |
| 1794901884 | 13.98 Volt | 390 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794901883 | 13.98 Volt | 390 Pkt | 50 Pkt | 89 Pcnt | 590 Pkts |
| 1794901284 | 13.98 Volt | 380 Pkt | 50 Pkt | 88 Pcnt | 660 Pkts |
| 1794901283 | 13.98 Volt | 380 Pkt | 50 Pkt | 88 Pcnt | 660 Pkts |
| 1794900684 | 13.98 Volt | 390 Pkt | 50 Pkt | 88 Pcnt | 540 Pkts |
| 1794900683 | 13.98 Volt | 390 Pkt | 50 Pkt | 88 Pcnt | 540 Pkts |
| 1794900084 | 13.98 Volt | 390 Pkt | 50 Pkt | 87 Pcnt | 570 Pkts |
| 1794900083 | 13.98 Volt | 390 Pkt | 50 Pkt | 87 Pcnt | 570 Pkts |
| 1794899484 | 13.98 Volt | 390 Pkt | 50 Pkt | 87 Pcnt | 540 Pkts |
| 1794899483 | 13.98 Volt | 390 Pkt | 50 Pkt | 87 Pcnt | 540 Pkts |
| 1794898884 | 13.98 Volt | 410 Pkt | 50 Pkt | 87 Pcnt | 510 Pkts |
| 1794898883 | 13.98 Volt | 410 Pkt | 50 Pkt | 87 Pcnt | 510 Pkts |
| 1794898284 | 13.98 Volt | 400 Pkt | 50 Pkt | 87 Pcnt | 490 Pkts |
| 1794898283 | 13.98 Volt | 400 Pkt | 50 Pkt | 87 Pcnt | 490 Pkts |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Dg10m: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)