This is the latest recevied telemetry packets stored in our database for station/object VE6MPR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274014 | 137 | 1 | 157 | 78 | 114 |
| 1770142508 | 137 | 1 | 153 | 76 | 114 |
| 1770140708 | 136 | 1 | 153 | 76 | 114 |
| 1770138908 | 136 | 1 | 153 | 76 | 114 |
| 1770137108 | 137 | 1 | 153 | 76 | 114 |
| 1770135308 | 137 | 1 | 153 | 76 | 114 |
| 1770133508 | 137 | 1 | 152 | 76 | 114 |
| 1770131708 | 137 | 1 | 151 | 75 | 114 |
| 1770129917 | 136 | 1 | 151 | 75 | 114 |
| 1770128108 | 136 | 1 | 151 | 75 | 114 |
| 1770126308 | 136 | 1 | 151 | 75 | 114 |
| 1770124508 | 136 | 1 | 151 | 75 | 114 |
| 1770122708 | 136 | 1 | 151 | 75 | 114 |
| 1770120908 | 136 | 1 | 151 | 75 | 114 |
| 1770119108 | 136 | 1 | 151 | 75 | 114 |
| 1770117308 | 136 | 1 | 150 | 75 | 114 |
| 1770115508 | 136 | 1 | 151 | 75 | 114 |
| 1770113708 | 136 | 1 | 150 | 75 | 114 |
| 1770111907 | 136 | 1 | 151 | 75 | 114 |
| 1770110107 | 136 | 1 | 150 | 75 | 114 |
| 1770108307 | 136 | 1 | 151 | 75 | 114 |
| 1770106507 | 136 | 1 | 151 | 75 | 114 |
| 1770104707 | 136 | 1 | 151 | 75 | 114 |
| 1770102907 | 137 | 1 | 152 | 75 | 114 |
| 1770101107 | 136 | 1 | 152 | 76 | 114 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)