APRS Track Direct

My position About ☰

reset

VK4RBO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Rx1h*	Dg1h*	Eff1h*
1836274758	13.84 Volt	390 Pkt	110 Pkt	83 Pcnt
1836274159	13.84 Volt	340 Pkt	90 Pkt	81 Pcnt
1762364686	13.91 Volt	330 Pkt	80 Pkt	86 Pcnt
1762364086	13.91 Volt	310 Pkt	80 Pkt	86 Pcnt
1762363486	13.91 Volt	320 Pkt	90 Pkt	86 Pcnt
1762362886	13.91 Volt	300 Pkt	80 Pkt	86 Pcnt
1762362289	13.91 Volt	290 Pkt	80 Pkt	87 Pcnt
1762361686	13.91 Volt	280 Pkt	80 Pkt	87 Pcnt
1762361086	13.91 Volt	290 Pkt	80 Pkt	86 Pcnt
1762360486	13.91 Volt	290 Pkt	80 Pkt	85 Pcnt
1762359886	13.91 Volt	280 Pkt	80 Pkt	85 Pcnt
1762359286	13.91 Volt	290 Pkt	80 Pkt	83 Pcnt
1762358686	13.91 Volt	290 Pkt	80 Pkt	83 Pcnt
1762358086	13.91 Volt	280 Pkt	70 Pkt	78 Pcnt
1762357486	13.91 Volt	310 Pkt	80 Pkt	79 Pcnt
1762356886	13.91 Volt	300 Pkt	70 Pkt	78 Pcnt
1762356286	13.91 Volt	300 Pkt	70 Pkt	78 Pcnt
1762355686	13.91 Volt	300 Pkt	70 Pkt	79 Pcnt
1762355090	13.91 Volt	300 Pkt	70 Pkt	80 Pcnt
1762354486	13.91 Volt	300 Pkt	70 Pkt	81 Pcnt
1762353886	13.91 Volt	300 Pkt	70 Pkt	81 Pcnt
1762353286	13.91 Volt	280 Pkt	70 Pkt	82 Pcnt
1762352686	13.91 Volt	270 Pkt	60 Pkt	82 Pcnt
1762352086	13.91 Volt	270 Pkt	60 Pkt	82 Pcnt
1762351490	13.91 Volt	280 Pkt	70 Pkt	83 Pcnt

*Used Equation Coefficients:

Battery: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

NA: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)