APRS Track Direct

My position About ☰

reset

OE3XDC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XDC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1774100007	10.43 Volt	430 Pkt	86 Pcnt	13 C
1774099707	10.43 Volt	440 Pkt	84 Pcnt	13 C
1774099407	10.43 Volt	440 Pkt	83 Pcnt	12.5 C
1774099109	10.43 Volt	440 Pkt	82 Pcnt	14 C
1774098807	10.43 Volt	430 Pkt	79 Pcnt	15 C
1774098507	10.43 Volt	410 Pkt	78 Pcnt	15 C
1774098207	10.43 Volt	420 Pkt	77 Pcnt	14 C
1774097907	10.43 Volt	430 Pkt	76 Pcnt	13.5 C
1774097607	10.43 Volt	440 Pkt	76 Pcnt	13 C
1774097307	10.43 Volt	440 Pkt	74 Pcnt	13 C
1774097007	10.43 Volt	450 Pkt	75 Pcnt	14.5 C
1774096707	10.43 Volt	430 Pkt	75 Pcnt	13.5 C
1774096407	10.43 Volt	430 Pkt	75 Pcnt	12 C
1774096107	10.43 Volt	430 Pkt	76 Pcnt	12.5 C
1774095807	10.43 Volt	420 Pkt	76 Pcnt	13.5 C
1774095507	10.43 Volt	420 Pkt	76 Pcnt	12.5 C
1774095207	10.43 Volt	430 Pkt	77 Pcnt	12 C
1774094907	10.43 Volt	430 Pkt	79 Pcnt	11 C
1774094607	10.43 Volt	430 Pkt	80 Pcnt	12 C
1774094309	10.43 Volt	430 Pkt	82 Pcnt	11.5 C
1774094007	10.43 Volt	430 Pkt	82 Pcnt	11.5 C
1774093708	10.43 Volt	430 Pkt	83 Pcnt	11.5 C
1774093407	10.43 Volt	430 Pkt	82 Pcnt	11 C
1774093108	10.43 Volt	430 Pkt	81 Pcnt	10.5 C
1774092807	10.43 Volt	440 Pkt	82 Pcnt	10.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)