This is the latest recevied telemetry packets stored in our database for station/object YC3LDO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1752766228 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752765305 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752764381 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 0 V |
1752763459 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752763458 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 V |
1752762535 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752761612 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752760689 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752759766 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752758843 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752757920 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752756997 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752756074 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
1752755152 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 V |
1752754229 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
1752753309 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 V |
1752752384 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 V |
1752751460 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 V |
1752750537 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
1752749615 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 V |
1752749615 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
1752748692 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752747770 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 V |
1752746847 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
1752745931 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)