This is the latest recevied telemetry packets stored in our database for station/object YO8CLN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx1h* | Dg1h* | Eff1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1732307970 | 30 Pkt | 0 Pkt | 55 Pcnt | 60 Pcnt | 0 None |
| 1732307969 | 30 Pkt | 0 Pkt | 55 Pcnt | 60 Pcnt | 0 None |
| 1732307670 | 30 Pkt | 0 Pkt | 57 Pcnt | 60 Pcnt | 0 None |
| 1732307368 | 30 Pkt | 0 Pkt | 61 Pcnt | 60 Pcnt | 0 None |
| 1732306769 | 30 Pkt | 0 Pkt | 55 Pcnt | 60 Pcnt | 0 None |
| 1732306768 | 30 Pkt | 0 Pkt | 55 Pcnt | 60 Pcnt | 0 None |
| 1732306469 | 30 Pkt | 0 Pkt | 54 Pcnt | 60 Pcnt | 0 None |
| 1732306169 | 30 Pkt | 0 Pkt | 53 Pcnt | 60 Pcnt | 0 None |
| 1732306167 | 30 Pkt | 0 Pkt | 53 Pcnt | 60 Pcnt | 0 None |
| 1732305568 | 20 Pkt | 0 Pkt | 51 Pcnt | 60 Pcnt | 0 None |
| 1732305567 | 20 Pkt | 0 Pkt | 51 Pcnt | 60 Pcnt | 0 None |
| 1732305267 | 20 Pkt | 0 Pkt | 47 Pcnt | 60 Pcnt | 0 None |
| 1732304966 | 20 Pkt | 0 Pkt | 47 Pcnt | 60 Pcnt | 0 None |
| 1732304667 | 20 Pkt | 0 Pkt | 50 Pcnt | 60 Pcnt | 0 None |
| 1732304367 | 20 Pkt | 0 Pkt | 45 Pcnt | 60 Pcnt | 0 None |
| 1732304366 | 20 Pkt | 0 Pkt | 45 Pcnt | 60 Pcnt | 0 None |
| 1732304067 | 20 Pkt | 0 Pkt | 43 Pcnt | 60 Pcnt | 0 None |
| 1732303767 | 20 Pkt | 0 Pkt | 38 Pcnt | 60 Pcnt | 0 None |
| 1732303765 | 20 Pkt | 0 Pkt | 38 Pcnt | 60 Pcnt | 0 None |
| 1732303466 | 20 Pkt | 0 Pkt | 40 Pcnt | 60 Pcnt | 0 None |
| 1732303166 | 20 Pkt | 0 Pkt | 37 Pcnt | 60 Pcnt | 0 None |
| 1732303164 | 20 Pkt | 0 Pkt | 37 Pcnt | 60 Pcnt | 0 None |
| 1732302866 | 10 Pkt | 0 Pkt | 33 Pcnt | 60 Pcnt | 0 None |
| 1732302565 | 20 Pkt | 0 Pkt | 37 Pcnt | 60 Pcnt | 0 None |
| 1732302564 | 20 Pkt | 0 Pkt | 37 Pcnt | 60 Pcnt | 0 None |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)