APRS Track Direct

My position About ☰

reset

SV1BYK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV1BYK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732289598	13.88 Volt	210 Pkt	80 Pkt	86 Pcnt
1732289594	13.88 Volt	210 Pkt	80 Pkt	86 Pcnt
1732289294	13.88 Volt	230 Pkt	80 Pkt	87 Pcnt
1732288994	13.88 Volt	220 Pkt	70 Pkt	86 Pcnt
1732288993	13.88 Volt	220 Pkt	70 Pkt	86 Pcnt
1732288693	13.88 Volt	230 Pkt	70 Pkt	87 Pcnt
1732288394	13.88 Volt	210 Pkt	70 Pkt	86 Pcnt
1732288394	13.88 Volt	210 Pkt	70 Pkt	86 Pcnt
1732288094	13.88 Volt	220 Pkt	70 Pkt	87 Pcnt
1732287794	13.88 Volt	230 Pkt	80 Pkt	86 Pcnt
1732287794	13.88 Volt	230 Pkt	80 Pkt	86 Pcnt
1732287494	13.88 Volt	250 Pkt	80 Pkt	87 Pcnt
1732287195	13.88 Volt	260 Pkt	80 Pkt	88 Pcnt
1732287194	13.88 Volt	260 Pkt	80 Pkt	88 Pcnt
1732286893	13.88 Volt	260 Pkt	80 Pkt	87 Pcnt
1732286594	13.88 Volt	260 Pkt	80 Pkt	87 Pcnt
1732286593	13.88 Volt	260 Pkt	80 Pkt	87 Pcnt
1732286294	13.88 Volt	260 Pkt	70 Pkt	87 Pcnt
1732285996	13.88 Volt	260 Pkt	80 Pkt	89 Pcnt
1732285994	13.88 Volt	260 Pkt	80 Pkt	89 Pcnt
1732285693	13.88 Volt	260 Pkt	70 Pkt	89 Pcnt
1732285394	13.88 Volt	280 Pkt	80 Pkt	89 Pcnt
1732285394	13.88 Volt	280 Pkt	80 Pkt	89 Pcnt
1732285094	13.88 Volt	290 Pkt	80 Pkt	89 Pcnt
1732284794	13.88 Volt	310 Pkt	80 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)