This is the latest recevied telemetry packets stored in our database for station/object I5NOD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754149067 | 35 Pkt/10m | 35 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754147866 | 2 Pkt/10m | 2 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754147768 | 22 Pkt/10m | 22 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754146666 | 33 Pkt/10m | 33 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754145466 | 50 Pkt/10m | 49 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754144265 | 51 Pkt/10m | 51 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754143065 | 52 Pkt/10m | 52 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754141867 | 43 Pkt/10m | 41 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754140666 | 45 Pkt/10m | 41 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754139476 | 25 Pkt/10m | 21 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754138259 | 37 Pkt/10m | 33 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754137058 | 47 Pkt/10m | 27 Pkt/10m | 5.02 Volt | 0 | 0 |
| 1754135858 | 50 Pkt/10m | 40 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754134668 | 45 Pkt/10m | 37 Pkt/10m | 5.02 Volt | 0 | 0 |
| 1754133452 | 39 Pkt/10m | 38 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754132252 | 33 Pkt/10m | 32 Pkt/10m | 5.02 Volt | 0 | 0 |
| 1754131052 | 41 Pkt/10m | 39 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754129855 | 65 Pkt/10m | 63 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754128652 | 38 Pkt/10m | 36 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754127451 | 44 Pkt/10m | 40 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754126250 | 45 Pkt/10m | 38 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754125051 | 60 Pkt/10m | 56 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754123850 | 38 Pkt/10m | 37 Pkt/10m | 5.06 Volt | 0 | 0 |
| 1754122651 | 37 Pkt/10m | 32 Pkt/10m | 5.04 Volt | 0 | 0 |
| 1754121453 | 1 Pkt/10m | 0 Pkt/10m | 5.02 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)