This is the latest recevied telemetry packets stored in our database for station/object YO4ISC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Text* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753846237 | 19.4 °C | 0 | 0 | 0 | 0 |
| 1753845638 | 19.3 °C | 0 | 0 | 0 | 0 |
| 1753845038 | 19.1 °C | 0 | 0 | 0 | 0 |
| 1753844437 | 19.2 °C | 0 | 0 | 0 | 0 |
| 1753843838 | 19.1 °C | 0 | 0 | 0 | 0 |
| 1753843238 | 19 °C | 0 | 0 | 0 | 0 |
| 1753842637 | 18.9 °C | 0 | 0 | 0 | 0 |
| 1753842038 | 19.1 °C | 0 | 0 | 0 | 0 |
| 1753841438 | 19.1 °C | 0 | 0 | 0 | 0 |
| 1753840837 | 19.2 °C | 0 | 0 | 0 | 0 |
| 1753840238 | 19.2 °C | 0 | 0 | 0 | 0 |
| 1753839638 | 19.4 °C | 0 | 0 | 0 | 0 |
| 1753839037 | 19.6 °C | 0 | 0 | 0 | 0 |
| 1753838438 | 19.7 °C | 0 | 0 | 0 | 0 |
| 1753837838 | 19.6 °C | 0 | 0 | 0 | 0 |
| 1753837237 | 19.8 °C | 0 | 0 | 0 | 0 |
| 1753836638 | 19.8 °C | 0 | 0 | 0 | 0 |
| 1753836038 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753835437 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753834837 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753834238 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753833637 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753833038 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1753832438 | 20.2 °C | 0 | 0 | 0 | 0 |
| 1753831837 | 20.2 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Text: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)