This is the latest recevied telemetry packets stored in our database for station/object 5B4ALR-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | AirQuality* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274388 | -77 dbm | 1.94 K | 0 | 0 | 0 |
| 1836274238 | -78 dbm | 1.9 K | 0 | 0 | 0 |
| 1782534712 | -78 dbm | 1.84 K | 0 | 0 | 0 |
| 1782534112 | -77 dbm | 1.92 K | 0 | 0 | 0 |
| 1782533512 | -78 dbm | 1.95 K | 0 | 0 | 0 |
| 1782532912 | -77 dbm | 1.98 K | 0 | 0 | 0 |
| 1782532312 | -78 dbm | 2.02 K | 0 | 0 | 0 |
| 1782531712 | -79 dbm | 2.18 K | 0 | 0 | 0 |
| 1782531112 | -79 dbm | 2.25 K | 0 | 0 | 0 |
| 1782530512 | -78 dbm | 2.32 K | 0 | 0 | 0 |
| 1782529912 | -78 dbm | 2.37 K | 0 | 0 | 0 |
| 1782529312 | -78 dbm | 2.32 K | 0 | 0 | 0 |
| 1782528712 | -78 dbm | 2.36 K | 0 | 0 | 0 |
| 1782528112 | -80 dbm | 2.29 K | 0 | 0 | 0 |
| 1782527512 | -78 dbm | 2.27 K | 0 | 0 | 0 |
| 1782526912 | -79 dbm | 2.3 K | 0 | 0 | 0 |
| 1782526312 | -79 dbm | 2.32 K | 0 | 0 | 0 |
| 1782525712 | -79 dbm | 2.37 K | 0 | 0 | 0 |
| 1782525112 | -80 dbm | 2.32 K | 0 | 0 | 0 |
| 1782524512 | -80 dbm | 2.36 K | 0 | 0 | 0 |
| 1782523912 | -79 dbm | 2.38 K | 0 | 0 | 0 |
| 1782523312 | -79 dbm | 2.48 K | 0 | 0 | 0 |
| 1782522712 | -77 dbm | 2.49 K | 0 | 0 | 0 |
| 1782522112 | -79 dbm | 2.46 K | 0 | 0 | 0 |
| 1782521512 | -80 dbm | 2.47 K | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
AirQuality: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)