APRS Track Direct

My position About ☰

reset

DM2HEY-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HEY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274744	13.51 Volt	0 Pkt	0 Pkt	4 Pcnt
1778005421	13.51 Volt	60 Pkt	30 Pkt	45 Pcnt
1778004521	13.51 Volt	50 Pkt	20 Pkt	34 Pcnt
1778003621	13.51 Volt	30 Pkt	20 Pkt	21 Pcnt
1778002721	13.51 Volt	20 Pkt	10 Pkt	16 Pcnt
1778001822	13.51 Volt	20 Pkt	10 Pkt	13 Pcnt
1778000922	13.51 Volt	10 Pkt	10 Pkt	11 Pcnt
1778000022	13.51 Volt	10 Pkt	0 Pkt	13 Pcnt
1777999122	13.51 Volt	10 Pkt	0 Pkt	15 Pcnt
1777998222	13.51 Volt	20 Pkt	10 Pkt	16 Pcnt
1777997322	13.51 Volt	20 Pkt	10 Pkt	15 Pcnt
1777996422	13.51 Volt	10 Pkt	10 Pkt	11 Pcnt
1777995522	13.51 Volt	10 Pkt	10 Pkt	12 Pcnt
1777994622	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1777993722	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1777992822	13.51 Volt	10 Pkt	0 Pkt	12 Pcnt
1777991922	13.51 Volt	10 Pkt	0 Pkt	14 Pcnt
1777991022	13.51 Volt	0 Pkt	0 Pkt	9 Pcnt
1777990122	13.51 Volt	0 Pkt	0 Pkt	8 Pcnt
1777989222	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1777988322	13.51 Volt	0 Pkt	0 Pkt	6 Pcnt
1777987422	13.51 Volt	0 Pkt	0 Pkt	9 Pcnt
1777986522	13.51 Volt	0 Pkt	0 Pkt	10 Pcnt
1777985622	13.51 Volt	0 Pkt	0 Pkt	9 Pcnt
1777984722	13.51 Volt	20 Pkt	10 Pkt	20 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)