This is the latest recevied telemetry packets stored in our database for station/object TA3CKY-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1836274314 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0.04 V |
| 1836274293 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0.06 V |
| 1762280585 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0.04 V |
| 1762280043 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0.04 V |
| 1762279855 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0.04 V |
| 1762279125 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0.04 V |
| 1762278789 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762278639 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 0.06 V |
| 1762278541 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762278395 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 0.06 V |
| 1762278065 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762277908 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
| 1762277818 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762277665 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0.04 V |
| 1762277659 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
| 1762277574 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762277409 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
| 1762277324 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762277158 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
| 1762277073 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762276935 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
| 1762276648 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762276450 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0.04 V |
| 1762276398 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0.04 V |
| 1762276205 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0.04 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)