This is the latest recevied telemetry packets stored in our database for station/object EB3CXQ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBAT* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274675 | 0 V | 0 | 0 | 0 | 0 |
| 1762330532 | 0 V | 0 | 0 | 0 | 0 |
| 1762329627 | 0 V | 0 | 0 | 0 | 0 |
| 1762328726 | 0 V | 0 | 0 | 0 | 0 |
| 1762327827 | 0 V | 0 | 0 | 0 | 0 |
| 1762326927 | 0 V | 0 | 0 | 0 | 0 |
| 1762326027 | 0 V | 0 | 0 | 0 | 0 |
| 1762325126 | 0 V | 0 | 0 | 0 | 0 |
| 1762324226 | 0 V | 0 | 0 | 0 | 0 |
| 1762323327 | 0 V | 0 | 0 | 0 | 0 |
| 1762322427 | 0 V | 0 | 0 | 0 | 0 |
| 1762321526 | 0 V | 0 | 0 | 0 | 0 |
| 1762320628 | 0 V | 0 | 0 | 0 | 0 |
| 1762319726 | 0 V | 0 | 0 | 0 | 0 |
| 1762318827 | 0 V | 0 | 0 | 0 | 0 |
| 1762317927 | 0 V | 0 | 0 | 0 | 0 |
| 1762317026 | 0 V | 0 | 0 | 0 | 0 |
| 1762316127 | 0 V | 0 | 0 | 0 | 0 |
| 1762315226 | 0 V | 0 | 0 | 0 | 0 |
| 1762314326 | 0 V | 0 | 0 | 0 | 0 |
| 1762313426 | 0 V | 0 | 0 | 0 | 0 |
| 1762312527 | 0 V | 0 | 0 | 0 | 0 |
| 1762311627 | 0 V | 0 | 0 | 0 | 0 |
| 1762310726 | 0 V | 0 | 0 | 0 | 0 |
| 1762309826 | 0 V | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)