This is the latest recevied telemetry packets stored in our database for station/object EA5GVP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Humidity* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274281 | 22 | 1017 | 64 | 0 | 0 |
| 1836274131 | 22 | 1017 | 65 | 0 | 0 |
| 1762263797 | 24 | 1017 | 39 | 0 | 0 |
| 1762263197 | 24 | 1017 | 41 | 0 | 0 |
| 1762262597 | 24 | 1017 | 40 | 0 | 0 |
| 1762261997 | 25 | 1017 | 37 | 0 | 0 |
| 1762261397 | 24 | 1017 | 41 | 0 | 0 |
| 1762260797 | 25 | 1018 | 38 | 0 | 0 |
| 1762260197 | 24 | 1018 | 37 | 0 | 0 |
| 1762259597 | 24 | 1018 | 38 | 0 | 0 |
| 1762258997 | 24 | 1018 | 38 | 0 | 0 |
| 1762258397 | 24 | 1018 | 37 | 0 | 0 |
| 1762257797 | 25 | 1018 | 35 | 0 | 0 |
| 1762257197 | 24 | 1018 | 37 | 0 | 0 |
| 1762256597 | 25 | 1019 | 35 | 0 | 0 |
| 1762255997 | 25 | 1019 | 35 | 0 | 0 |
| 1762255397 | 25 | 1019 | 34 | 0 | 0 |
| 1762254797 | 25 | 1019 | 35 | 0 | 0 |
| 1762254197 | 25 | 1019 | 35 | 0 | 0 |
| 1762253597 | 24 | 1019 | 36 | 0 | 0 |
| 1762252997 | 24 | 1019 | 37 | 0 | 0 |
| 1762252397 | 24 | 1019 | 35 | 0 | 0 |
| 1762251797 | 24 | 1019 | 35 | 0 | 0 |
| 1762251197 | 24 | 1019 | 37 | 0 | 0 |
| 1762250597 | 24 | 1019 | 35 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Humidity: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)