This is the latest recevied telemetry packets stored in our database for station/object HB9HFD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RXheure* | RX10min* | Volts* | RX 1h* | RXall* |
|---|---|---|---|---|---|
| 1836274641 | 0 | 0 | 0 | 0 | 0 |
| 1778012770 | 0 | 0 | 0 | 0 | 0 |
| 1778011869 | 0 | 0 | 0 | 0 | 0 |
| 1778010968 | 0 | 0 | 0 | 0 | 0 |
| 1778010068 | 0 | 0 | 0 | 0 | 0 |
| 1778009167 | 0 | 0 | 0 | 0 | 0 |
| 1778008266 | 0 | 0 | 0 | 0 | 0 |
| 1778007365 | 0 | 0 | 0 | 0 | 0 |
| 1778006464 | 0 | 0 | 0 | 0 | 0 |
| 1778005563 | 0 | 0 | 0 | 0 | 0 |
| 1778004663 | 0 | 0 | 0 | 0 | 0 |
| 1778003762 | 0 | 0 | 0 | 0 | 0 |
| 1778002861 | 0 | 0 | 0 | 0 | 0 |
| 1778001961 | 0 | 0 | 0 | 0 | 0 |
| 1778001059 | 0 | 0 | 0 | 0 | 0 |
| 1778000159 | 0 | 0 | 0 | 0 | 0 |
| 1777999258 | 0 | 0 | 0 | 0 | 0 |
| 1777998357 | 0 | 0 | 0 | 0 | 0 |
| 1777997456 | 0 | 0 | 0 | 0 | 0 |
| 1777996556 | 0 | 0 | 0 | 0 | 0 |
| 1777995657 | 0 | 0 | 0 | 0 | 0 |
| 1777994754 | 0 | 0 | 0 | 0 | 0 |
| 1777993853 | 0 | 0 | 0 | 0 | 0 |
| 1777992952 | 0 | 0 | 0 | 0 | 0 |
| 1777992051 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RXheure: 0, 0, 0
RX10min: 0, 0, 0
Volts: 0, 0, 0
RX 1h: 0, 0, 0
RXall: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)