This is the latest recevied telemetry packets stored in our database for station/object OR7F-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Temperature* | Humidity* | Value5* |
|---|---|---|---|---|---|
| 1758202350 | 13 Nr | 12 Vdc | 21.14 deg.C | 56 % | 0 |
| 1758198747 | 11 Nr | 12.02 Vdc | 20.86 deg.C | 56 % | 0 |
| 1758195145 | 11 Nr | 12 Vdc | 20.56 deg.C | 56 % | 0 |
| 1758191542 | 11 Nr | 12 Vdc | 20.2 deg.C | 56 % | 0 |
| 1758187939 | 12 Nr | 12 Vdc | 19.9 deg.C | 56 % | 0 |
| 1758184346 | 4 Nr | 12 Vdc | -50 deg.C | 0 % | 0 |
| 1758177370 | 15 Nr | 12 Vdc | 19.24 deg.C | 54 % | 0 |
| 1758173770 | 13 Nr | 12 Vdc | 19.3 deg.C | 54 % | 0 |
| 1758170168 | 13 Nr | 12 Vdc | 19.38 deg.C | 54 % | 0 |
| 1758166568 | 14 Nr | 12 Vdc | 19.5 deg.C | 54 % | 0 |
| 1758162968 | 15 Nr | 12 Vdc | 19.58 deg.C | 54 % | 0 |
| 1758159368 | 15 Nr | 12 Vdc | 19.7 deg.C | 54 % | 0 |
| 1758155768 | 14 Nr | 12 Vdc | 19.84 deg.C | 54 % | 0 |
| 1758148566 | 16 Nr | 12 Vdc | 20.22 deg.C | 53 % | 0 |
| 1758144966 | 14 Nr | 12 Vdc | 20.46 deg.C | 52 % | 0 |
| 1758141360 | 9 Nr | 12 Vdc | 20.74 deg.C | 51 % | 0 |
| 1758137760 | 9 Nr | 12 Vdc | 21 deg.C | 50 % | 0 |
| 1758134159 | 15 Nr | 12 Vdc | 21.02 deg.C | 50 % | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Temperature: 0, 0.02, -50
Humidity: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)