This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | I_Ext* | P_Ext* | T_Ext* |
|---|---|---|---|---|---|
| 1794915739 | 4.1 VDC | 11.9 VDC | -1320 mA | 4 W | 11 °C |
| 1794915438 | 4 VDC | 11.9 VDC | -1340 mA | 4.1 W | 11 °C |
| 1794915137 | 4.1 VDC | 11.9 VDC | -1320 mA | 4.2 W | 11 °C |
| 1794914836 | 4.1 VDC | 11.9 VDC | -1350 mA | 4.1 W | 10 °C |
| 1794914535 | 4.1 VDC | 11.9 VDC | -1280 mA | 3.6 W | 10 °C |
| 1794914235 | 4.1 VDC | 11.9 VDC | -1270 mA | 2.3 W | 10 °C |
| 1794913934 | 4.1 VDC | 11.9 VDC | -1220 mA | 2.7 W | 9 °C |
| 1794913634 | 4 VDC | 11.8 VDC | -1130 mA | 1.1 W | 10 °C |
| 1794913334 | 4.1 VDC | 11.8 VDC | -1220 mA | 1.6 W | 10 °C |
| 1794913032 | 4.1 VDC | 11.8 VDC | -1110 mA | 1.5 W | 9 °C |
| 1794912732 | 4.1 VDC | 11.8 VDC | -1170 mA | 1.6 W | 9 °C |
| 1794912431 | 4.1 VDC | 11.8 VDC | -1130 mA | 1.5 W | 9 °C |
| 1794912131 | 4.1 VDC | 11.8 VDC | -1160 mA | 1.7 W | 8 °C |
| 1794911831 | 4.1 VDC | 11.8 VDC | -1050 mA | 0.9 W | 8 °C |
| 1794911530 | 4.1 VDC | 11.7 VDC | -950 mA | 0.6 W | 8 °C |
| 1794911225 | 4.1 VDC | 11.8 VDC | -1040 mA | 0.5 W | 8 °C |
| 1794910925 | 4.1 VDC | 11.8 VDC | -1030 mA | 0.3 W | 8 °C |
| 1794910624 | 4.1 VDC | 11.7 VDC | -970 mA | 0.5 W | 8 °C |
| 1794910324 | 4.1 VDC | 11.7 VDC | -980 mA | 0.2 W | 8 °C |
| 1794910023 | 4.1 VDC | 11.7 VDC | -910 mA | 1 W | 8 °C |
| 1794909723 | 4 VDC | 11.7 VDC | -910 mA | 1 W | 8 °C |
| 1794909422 | 4.1 VDC | 11.7 VDC | -860 mA | 1.8 W | 8 °C |
| 1794909122 | 4.1 VDC | 11.7 VDC | -860 mA | 1.6 W | 8 °C |
| 1794908821 | 4.1 VDC | 11.7 VDC | -790 mA | 2.7 W | 8 °C |
| 1794908521 | 4.1 VDC | 11.7 VDC | -760 mA | 3.8 W | 8 °C |
*Used Equation Coefficients:
V_Batt: 0, 0.1, 0
V_Ext: 0, 0.1, 0
I_Ext: 0, 10, -2000
P_Ext: 0, 0.1, -10
T_Ext: 0, 1, -100
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)