This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750111859 | 81 Count | 413 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1750110053 | 79 Count | 400 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1750108247 | 77 Count | 390 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750106442 | 75 Count | 384 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1750104636 | 73 Count | 374 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750102830 | 71 Count | 365 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750101024 | 69 Count | 356 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1750100189 | 68 Count | 356 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1750098383 | 66 Count | 345 Count | 0 Count | 4.31 VDC | 0.14 VDC |
| 1750096577 | 64 Count | 333 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1750094849 | 62 Count | 318 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750093043 | 60 Count | 306 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750091237 | 58 Count | 299 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1750089431 | 56 Count | 289 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1750087626 | 54 Count | 282 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750085819 | 52 Count | 275 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1750084013 | 50 Count | 269 Count | 0 Count | 4.31 VDC | 0.14 VDC |
| 1750082207 | 48 Count | 261 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1750080402 | 46 Count | 253 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750078596 | 44 Count | 245 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750076790 | 42 Count | 222 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1750074984 | 40 Count | 215 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1750073081 | 38 Count | 204 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750070744 | 36 Count | 189 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1750068938 | 34 Count | 170 Count | 0 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)