This is the latest recevied telemetry packets stored in our database for station/object KQ6NO-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Array V* | Bus V* | Batt I* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754180403 | 17.82 Volts | 13.07 Volts | -0.04 Amps | 0 | 0 |
| 1754179446 | 18.18 Volts | 13.01 Volts | -0.08 Amps | 0 | 0 |
| 1754178545 | 18.27 Volts | 13.01 Volts | -0.08 Amps | 0 | 0 |
| 1754177648 | 18.36 Volts | 13.01 Volts | -0.06 Amps | 0 | 0 |
| 1754176746 | 18.54 Volts | 13.01 Volts | -0.06 Amps | 0 | 0 |
| 1754175787 | 18.54 Volts | 13.01 Volts | -0.06 Amps | 0 | 0 |
| 1754174887 | 18.72 Volts | 13.01 Volts | -0.08 Amps | 0 | 0 |
| 1754173988 | 18.63 Volts | 13.01 Volts | -0.1 Amps | 0 | 0 |
| 1754173088 | 18.72 Volts | 13.01 Volts | -0.12 Amps | 0 | 0 |
| 1754172128 | 18.81 Volts | 13.07 Volts | -0.06 Amps | 0 | 0 |
| 1754171229 | 18.9 Volts | 13.07 Volts | -0.06 Amps | 0 | 0 |
| 1754170329 | 18.9 Volts | 13.07 Volts | -0.06 Amps | 0 | 0 |
| 1754169430 | 18.9 Volts | 13.07 Volts | -0.08 Amps | 0 | 0 |
| 1754168470 | 18.9 Volts | 13.07 Volts | -0.08 Amps | 0 | 0 |
| 1754167571 | 18.9 Volts | 13.07 Volts | -0.1 Amps | 0 | 0 |
| 1754166672 | 18.9 Volts | 13.01 Volts | -0.19 Amps | 0 | 0 |
| 1754165772 | 18.81 Volts | 13.07 Volts | -0.1 Amps | 0 | 0 |
| 1754164814 | 18.72 Volts | 13.13 Volts | -0.06 Amps | 0 | 0 |
| 1754163914 | 18.9 Volts | 13.13 Volts | -0.08 Amps | 0 | 0 |
| 1754163015 | 18.72 Volts | 13.13 Volts | -0.04 Amps | 0 | 0 |
| 1754162114 | 18.9 Volts | 13.13 Volts | -0.06 Amps | 0 | 0 |
| 1754161156 | 18.99 Volts | 13.13 Volts | -0.04 Amps | 0 | 0 |
| 1754160256 | 18.9 Volts | 13.13 Volts | -0.06 Amps | 0 | 0 |
| 1754159356 | 18.9 Volts | 13.19 Volts | -0.04 Amps | 0 | 0 |
| 1754158457 | 19.26 Volts | 13.19 Volts | -0.25 Amps | 0 | 0 |
*Used Equation Coefficients:
Array V: 0, 0.09, 0
Bus V: 0, 0.0608, 0
Batt I: 0, 0.0215, -2.08
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)